Hi to everyone, from Guatemala!!

[GeO2110]

Hi, well my first post, buy my PC, hope receive it on Monday, to try to remove the swirl marks that have my car..

About my car, is a Mazda 3, 2006 Red Cooper Mica.. Lovely color...

The problem was that was some swirls marks, buy the 3m swirl mark remover by hand, and you can imagine how i left it, worst than it was...

Well my plan is, with orange pad + PC + speed 6 with 3m swirl remover....

Maguires Step 1 with LC blue pad

Maguires Step 2 with a LC white pad

Poorboys EX Sealant + Carnuba by hand, since i don't have a gray pad

Remove by PC + Lambswool + Cobra MF

Maguires step 3 by hand and

Remove by PC + Lambswool + Cobra MF

Please let me know if i wrong....

Thanks, great pleace...

:buffing:

[mulder]

:welcome:

[sal329]

Welcome to AG
I would not hit the car with an Oranage Pad first. Find an area and use that as your test. Start with the least aggressive combo of pad and polish and work your way up till you find the least aggressive way to remove your swirls.

[GeO2110]

Welcome to AG
I would not hit the car with an Oranage Pad first. Find an area and use that as your test. Start with the least aggressive combo of pad and polish and work your way up till you find the least aggressive way to remove your swirls.

Thank you, would be fine if i try first the LC blue pad + Step 1 of Migueres. By the way, does the Migueres 3 step, are ok for the PC and the LC pads???

Feed back please :buffing: