Bmw 323 -00

[mortil]

Started with washing off all the dirt.
http://polerat.mortil.com/bmw323/bmw323_1.jpg
Half the hood was re-painted but nicely done . so it wasnt any problems with making it look good
http://polerat.mortil.com/bmw323/bmw323_2.jpg
Tale pipes in bad shape.
http://polerat.mortil.com/bmw323/bmw323_3.jpg
bugs that didnt go away in the wash.
http://polerat.mortil.com/bmw323/bmw323_4.jpg
The rims was really dirty but noting the R2000 cleaner wont take care of.
http://polerat.mortil.com/bmw323/bmw323_5.jpg
Done :)
http://polerat.mortil.com/bmw323/bmw323_6.jpg
Talepipes polished and looking nice :) thanks to my darling that helpt me with that one :) (the spots on it is rust or the chrome that have droped off)
http://polerat.mortil.com/bmw323/bmw323_7.jpg
engine hood finished. TopTool and white hard pads. and Menzerna Intensive polish to get it right . needed to learn Menzerna compounds. first car i polished with Menzerna . (i always use 3M otherwise)
http://polerat.mortil.com/bmw323/bmw323_8.jpg
just simple stuff to fix now :)
http://polerat.mortil.com/bmw323/bmw323_9.jpg
a lot of scratches and really hard paint, but hey why give up ?
http://polerat.mortil.com/bmw323/bmw323_11.jpg
Nice when finished ?
http://polerat.mortil.com/bmw323/bmw323_12.jpg
Ready for its owner :)
http://polerat.mortil.com/bmw323/bmw323_13.jpg

[mortil]

Throws this one in here as well .

this car was in the worst shape ive seen on a long time .

to the right i used Toptool (does anyone know what that is?) and hard pads with 3M extrafine and on the left noting :)
http://polerat.mortil.com/saab9-5_1.jpg

the result was ok .
http://polerat.mortil.com/saab9-5_2.jpg

one satisfied owner walked around the car making an inspection :)
he was more than pleased with the outcome .
http://polerat.mortil.com/saab9-5_3.jpg

[mortil]

Bonus one :D

got an call one afternoon about a urgent problem. a mustang that should be on a show 2 days later. i went down to my garage and the mustang came down .
http://www.mortil.com/polerat/musse1.jpg


about 4 a clock in the morning the mustang was finished. 07 i started my real job (this day i was realy tired.

it ended up like this anyway :)
http://www.mortil.com/polerat/musse2.jpg

[robb01]

Looks very nice

[Dusty Bottoms]

Very Nice!

[id-type-s]

Nice work, TopTool????

[mortil]

okey. i just Copy > paste from another forum.


Okey. this is the TopTool.
http://polerat.mortil.com/flex/toptool1.jpg
it uses everything from 115mm pads to 135mm (5.25inch) pads the last is ultimate.

it has a high register of RPMs. from 2200 to 6500.
http://polerat.mortil.com/flex/toptool2.jpg

Model1 this is. i hope they come with a Mod2 in the future.
http://polerat.mortil.com/flex/toptool3.jpg

The most regular pads i use. Black is very soft. blue is soft. and white is very hard. (i use black for polish and Sealants, blue for 3M extrafine rubbing and white for removing deep scratches with 3M fastcut PLUS or sometime extrafine )
http://polerat.mortil.com/flex/toptool4.jpg

the length of the pads on the machine when the pads is centerd (in centimeters)
http://polerat.mortil.com/flex/toptool5.jpg

the RPM list. :) nice.
http://polerat.mortil.com/flex/toptool6.jpg


i did do a little movie on the polishing my saab a little bit. now i only used blue pads and 3M machine polish
[ame=http://www.youtube.com/watch?v=mahVoqQHaEI]YouTube - Toptool small test[/video]

The result after a few minutes running. (ok my car was in good condition before but i dont have a good car to show it on . :(

http://polerat.mortil.com/flex/toptool7.jpg

i bought my Toptool from Lj-Trading here in sweden after been talking to friends working on detailing firms. the owner of lj-trading said that detailing firms that bought the TopTool say they saves about 30% of the time it takes with only a rotating mashine and cyclo. (can only refer to what a friend that works on Mr.Cap said. cyclo sucks. and yes. now i totaly agree. i sold my cyclo after i bought this.

if there is some questions just shoot :) i will try to answer :)

Bonus picture :)
http://polerat.mortil.com/flex/flex.jpg
My Rotary flex. 1500watts engine powerfull as hell . never let me down :) this is the first machine i learned to polish with.