Good Combo?

[drastic_detail]

Im about to enter the polishing by machine world and was trying to figure out what to use to get rid of some light swrils. I got it down to these:

XMT #2 followed by #1 followed by XMT finishing glaze....or

Pinn ASR followed by Pinn AFP....or

Menz intenseve 91E than 85U than 115C

I will follow the polish with the klasse twins topped with P21s Concourse.

Which route should I go???

[charliehaley]

All are great polishes but if you plan on ever doing a car other than yours with anything more than lighter swirls i would go with the menz you have listed except because it is a little stronger but i would loose the 115c as it is just a glaze and if you remove all the swirls properly you wont need it plus i hear i doesn't do very much as far as looks go. If you have the money i would add PO85RD to the list to really burnish the paint.

[drastic_detail]

Thanx

[loudog2]

How bad is the car? Normal combos for medium to heavy are menzerna SIP/106FA. I don't like the IP(91E), it dusts way to much. Try the new power finish. It's like 91E with low dust and the shine of 106FA. I just used it on a car w/light to medium work needed. It worked well. Wolfgang TSR also works well. I haven't tried the pinnicle ASR yet.

[ScottB]

SIP / 106FF or FA are a proven combo ...