bgray
10-03-2008, 10:12 PM
9 Year old White Truck, been waxed but no correction ever done. It is Very Badly Swirled. I could not capture pictures of how bad it is because of the color, if it was black it would be very rough...
I used a LCC Foam Wool Pad with Menz Power Gloss and the swirls were still present, but defiently better. Then tried a LCC Orange with Powergloss and got better...So i decided to do half the hood to see how it would look at the end of a complete process..So after the Power Gloss I did Menz IP, Menz Nano, Menz 85Rd, then top wityh Souvern...
The swirls are al gone, BUT there is still markings(scratches) in the Paint, Im using thse pads a rotary at proper speed and the abbrassives are diminished...
AND, Technically, after doing Power Gloss, shouldn't ALL swirls be removed? The polishing steps be used to re-jewel the finish remove trails..... so why would the swirls get better as i progressed...?
I am expecting a relitively flawless finish, as there is are no deep scratches, but i still cant seem to remove them all....AM I Expecting to much?(still an amatuer with my Rotary)
any hints, sorry for no photos but i cant capture them with the color...
Feed back please
I used a LCC Foam Wool Pad with Menz Power Gloss and the swirls were still present, but defiently better. Then tried a LCC Orange with Powergloss and got better...So i decided to do half the hood to see how it would look at the end of a complete process..So after the Power Gloss I did Menz IP, Menz Nano, Menz 85Rd, then top wityh Souvern...
The swirls are al gone, BUT there is still markings(scratches) in the Paint, Im using thse pads a rotary at proper speed and the abbrassives are diminished...
AND, Technically, after doing Power Gloss, shouldn't ALL swirls be removed? The polishing steps be used to re-jewel the finish remove trails..... so why would the swirls get better as i progressed...?
I am expecting a relitively flawless finish, as there is are no deep scratches, but i still cant seem to remove them all....AM I Expecting to much?(still an amatuer with my Rotary)
any hints, sorry for no photos but i cant capture them with the color...
Feed back please