critical_level2
09-02-2008, 03:46 PM
I am getting ready to order my polish and wax/sealer. I am a bit confused by the choices out there. I would love to get the Mezerna and wolfgang stuff, but it is a bit out of my price range.
These will be used on an 05 Honda Element with a PC.
I have narrowed it to the following 2 choices:
Pinnacle XMT #1 and #3 swirl remover, XMT Finishing Glaze, XMT 360, XMT 180 Wax. OR
Meguiar’s #83, #80 and #21 v.2 sealant.
I have read many people with Hondas getting very good results from the Megs stuff. Is it about the same as the XMT or is XMT a bit better? IF I go XMT, would I use the Glaze and 360 at the same time, or would it be better to use just the glaze with the XMT 180?
These will be used on an 05 Honda Element with a PC.
I have narrowed it to the following 2 choices:
Pinnacle XMT #1 and #3 swirl remover, XMT Finishing Glaze, XMT 360, XMT 180 Wax. OR
Meguiar’s #83, #80 and #21 v.2 sealant.
I have read many people with Hondas getting very good results from the Megs stuff. Is it about the same as the XMT or is XMT a bit better? IF I go XMT, would I use the Glaze and 360 at the same time, or would it be better to use just the glaze with the XMT 180?