View Full Version : Wolfgang Process?
Reddwarf
06-27-2008, 10:04 PM
I have several of the older Wolfgang products.
1. Paintwork Polish Enhancer
2. Finishing Glaze (old formula)
3. Deep Gloss sealant
Would the correct process be 1, 2, 3?
If I need to use a polish like PB SSR 1 or SSR 2.5 would that go before 1 or after 1?
ScottB
06-28-2008, 07:17 AM
your good on your steps. I believe the original Wolfgang Finishing Glaze was still a light polish versus a true glaze also.
If polishing remove step one and likely two as both are redundant.
Reddwarf
06-28-2008, 08:17 AM
Thanks killr. I'll see if I can skip the polish and use the 3 wolfgang trio.
Reddwarf
06-28-2008, 12:32 PM
I tried the Paintwork Polish Enhancer and it left the paint feeling so smooth and looking shiny, but there are lots of swirls. I tried the finishing glaze and the paint looks wet but with lots of swirls! Now, all shiny swirls!
I moved on to the XMT 2 and 3 to see what I can do with that.
ScottB
06-28-2008, 03:59 PM
remember finishing glaze is a final polish or finishing polish and likely is not strong enough for swirls. You are correct to move to more abrasive polishes.
I only use a paint cleanser on perfect paint .. otherwise I grab the polish.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.