View Full Version : Wolfgang Process?

06-27-2008, 10:04 PM
I have several of the older Wolfgang products.

1. Paintwork Polish Enhancer

2. Finishing Glaze (old formula)

3. Deep Gloss sealant

Would the correct process be 1, 2, 3?

If I need to use a polish like PB SSR 1 or SSR 2.5 would that go before 1 or after 1?

06-28-2008, 07:17 AM
your good on your steps. I believe the original Wolfgang Finishing Glaze was still a light polish versus a true glaze also.

If polishing remove step one and likely two as both are redundant.

06-28-2008, 08:17 AM
Thanks killr. I'll see if I can skip the polish and use the 3 wolfgang trio.

06-28-2008, 12:32 PM
I tried the Paintwork Polish Enhancer and it left the paint feeling so smooth and looking shiny, but there are lots of swirls. I tried the finishing glaze and the paint looks wet but with lots of swirls! Now, all shiny swirls!

I moved on to the XMT 2 and 3 to see what I can do with that.

06-28-2008, 03:59 PM
remember finishing glaze is a final polish or finishing polish and likely is not strong enough for swirls. You are correct to move to more abrasive polishes.

I only use a paint cleanser on perfect paint .. otherwise I grab the polish.