Couple questions

[svtsupremecy]

Ok so summer is here, and i did a fresh buff on the car 2-3 months ago. However after parking at my new apartment, they run sprinklers ALL night it seems. It had some minor water etching before, but it has some more from the sprinklers. So i was going to do a 50/50 vinegar wipedown after a wash, and then buff it with Vanilla Moose Glaze or RMG or both, not sure. Do you guys think a claybar or Klasse AIO is necessary?? And what should i top off my VMG/RMG, i have Collinite (leaning on this one), Nattys Blue, and Pinnacle Souveran.

[ScottB]

if you have water etching from sprinklers you likely will need a dedicated polish and machine. RMG is a glaze and can be used once spots are gone and before your wax as wanted. I suspect your gonna want a true polish like Menzerna IP or SIP if those etchings are stubborn and usually are. Remember sprinklers sometimes use canal or well water and can introduce calcium, rust and other contaminents too.