Bilt Hamber Touch-Less often use?

[MarioSH]

Hello,

Simple question; is BH Touch-Less safe to use often? Or will it be harsh on the paint? I’m talking about an uncoated car which I recently used CarPro descale on to remove old wax.

Thank you.

[chefwong]

It's a High PH pre-wash to help get off as much before a contact wash.

No need to use it before coating/sealing/waxing the car.
It's used after it's been LSP as part of the wash process.

[MisterSnoop]

It will degrade any wax/sealant on the car

[PouncingPanzer]

It strips Collinite 845 in about 3 washes if used as a pre-wash for each one. No visible degradation of trims or plastics to report. Cleans like a MOFO.

Sent from my SM-S911U using Tapatalk

[Optimus Grime]

For light cleaning you can use it at a 2% PIR. That should get the dirt off without your LSP taking a big hit.

[PouncingPanzer]

For light cleaning you can use it at a 2% PIR. That should get the dirt off without your LSP taking a big hit.It does some people just wanna see that foam though...I could care less, does it clean? Yes. Ok good.

Sent from my SM-S911U using Tapatalk

[briarpatch]

I have it mixed at 4 pct PIR in an IK Foam Pro 12. At that strength, I see it as an 'as needed' product. It does an outstanding job on road film for sure.

[PouncingPanzer]

I have it mixed at 4 pct PIR in an IK Foam Pro 12. At that strength, I see it as an 'as needed' product. It does an outstanding job on road film for sure.I feel it is certainly tailored towards those cars that don't get washed often, especially at the higher PIR. I just love it's strength even though it is OP for what I ask of it save the once a year side-job on something neglected. I have not measured it via the PIR method. I have always used 2oz of whatever product I am using in my cannon, with the touchless I use only 1.5oz, 2.5oz on the rare tough job. My wife's car gets it at my full strength but I also wash her car maybe 3-4 times a year so it needs it.

Sent from my SM-S911U using Tapatalk