View Full Version : How to apply a PASTE wax to a machine polisher pad
Don M
08-07-2023, 06:24 AM
This video had the sound deleted, but it shows me applying the paste wax to a new, fresh polishing pad. I actually used a little more than needed for this first application - it covered the entire hood, LF fender and driver's front door on my Wife's Escape. I only had to reapply wax to the pad twice to cover the entire car.
https://www.youtube.com/watch?v=EKXHouoTQsk&ab_channel=DetailingBasics-Keepingitsimple
Paul A.
08-07-2023, 08:19 AM
When I used those types of products in the past i would cut around the perimeter with a knife and remove the entire block. Then i would rub it on the DA waxing pad.
Your method works well also. Good video and thanks for sharing it, Don.
PaulMys
08-07-2023, 04:42 PM
Good stuff, Don.
A little goes a LONG way when you are machine-applying it.
Danube
08-09-2023, 08:59 AM
Wax application by a DA certainly has it's advantages over hand application.
Have been applying wax and sealants via a D/A for many years now, much easier to get a consistent, thin coat applied.
The easiest of all being Gyeon Q2 Wax with the deodorant-stick style container. Such a good idea that other companies making a paste wax could learn from.
https://i.postimg.cc/FRHVy4CV/IMG-1293.jpg (https://postimg.cc/sBbWztrM)
https://i.postimg.cc/FH0pmGJ3/IMG-1297.jpg (https://postimg.cc/gxk8HVs2)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.