PDA

View Full Version : Can I polish decal stripes?


Bdubbs
11-25-2022, 01:04 AM
Hey guys!

So cars are in winter hibernation. Our 2019 Shelby GT 350 has a bunch of scratches and the paint feels rough to the touch.

We just bought it this past May so I don't know much history other than it came from Arizona and must have been daily driven. Guessing that because it already has 17k miles.

I think the stripes are vinyl, but not sure. They are full of scratches as well.

I have a few compounds to use, but have had the best luck with Wolfgang Uber compound or a less harsh compound total swirl remover followed by finishing glaze.

Any help is appreciated!https://uploads.tapatalk-cdn.com/20221125/1b8446ba10931ad6606f184bce77e13b.jpg

Sent from my moto g power (2021) using Tapatalk
https://uploads.tapatalk-cdn.com/20221125/aedbc0ee60e8809446c227d4e839018d.jpg
Bdubbs
11-25-2022, 02:45 AM
Did a test area below drivers side window. It looked worse than what I could capture with my phone. Turned out great.https://uploads.tapatalk-cdn.com/20221125/200562d6bce528bfb5069cf5031b7e29.jpghttps://uploads.tapatalk-cdn.com/20221125/f68255e12065a60da8e4767c51c898fb.jpg

Sent from my moto g power (2021) using Tapatalk
The Guz
11-25-2022, 03:22 AM
Gloss vinyl can be polished. Try the least aggressive polish first with a polishing pad. Matte decals are the ones not to be polished.
Bdubbs
11-25-2022, 05:19 AM
Gloss vinyl can be polished. Try the least aggressive polish first with a polishing pad. Matte decals are the ones not to be polished.I believe mine are a gloss finish. Is there a way to know for sure?

I can use a 3" pad along with my Porter Cable?

Thank you.

Sent from my moto g power (2021) using Tapatalk
Flash Gordon
11-26-2022, 09:28 AM
I believe mine are a gloss finish. Is there a way to know for sure?

I can use a 3" pad along with my Porter Cable?

Thank you.

Sent from my moto g power (2021) using Tapatalk

Porter cable would be perfect. Doesn't matter what size pad. If it were me I would hit it with 3D Speed or 3D One.
Those are definitely vinyl. Your good to polish as Guz was saying.

Beautiful ride!
Bdubbs
11-26-2022, 05:47 PM
Porter cable would be perfect. Doesn't matter what size pad. If it were me I would hit it with 3D Speed or 3D One.
Those are definitely vinyl. Your good to polish as Guz was saying.

Beautiful ride!Really appreciate it!

I'm not familiar with 3D speed or 3D one. I'll have to research it.

Sent from my moto g power (2021) using Tapatalk
Flash Gordon
11-26-2022, 06:38 PM
Really appreciate it!

I'm not familiar with 3D speed or 3D one. I'll have to research it.

Sent from my moto g power (2021) using Tapatalk

No problem. Speed is made for everyday use where One is a compound.

Speed is so good that when the pandemic hit (causing the supply chain to take a hit) I freaked out and ordered 5 gallons (was wise if for nothing else a hedge against inflation).

You won't see me promote very many products. Both of these are so good they deserve it.
PaulMys
11-26-2022, 06:50 PM
And Speed contains 3D's "Montan Wax".

Your paint will feel slicker that owl $hit after using it........ ;)
Flash Gordon
11-26-2022, 06:54 PM
And Speed contains 3D's "Montan Wax".

Your paint will feel slicker that owl $hit after using it........ ;)

And super glossy ............ :drool:
Flash Gordon
11-26-2022, 07:03 PM
If you use a claybar be super careful around the edge of the stripes.
PaulMys
11-26-2022, 07:16 PM
If you use a claybar be super careful around the edge of the stripes.

Yes.

Only run the clay "away from" the edges.

Not "into" the edges.
The Guz
11-26-2022, 08:07 PM
I believe mine are a gloss finish. Is there a way to know for sure?

I can use a 3" pad along with my Porter Cable?

Thank you.

Sent from my moto g power (2021) using Tapatalk

They are gloss vinyl from your photo. You can use a polishing pad to start out with and the same polish you will use in the paint. Do a small test spot first.
Bdubbs
11-26-2022, 08:39 PM
I appreciate all the help!

Are you guys recommending trying the 3D speed over my Wolfgang total swirl remover followed by finishing glaze, then there paint sealant?

Sent from my moto g power (2021) using Tapatalk
Flash Gordon
11-27-2022, 04:58 AM
I appreciate all the help!

Are you guys recommending trying the 3D speed over my Wolfgang total swirl remover followed by finishing glaze, then there paint sealant?

Sent from my moto g power (2021) using Tapatalk



I've never used the Wolfgang brand so can't give an honest comparison. If that's something you already have then I would probably use it.

If you want to save some time you could use a ceramic spray on that last step.