Marolex Axel Foamer 7000 with Xiaomi

[DanaDetailingPros]

When I was deciding where to place the valve I noticed it was already made for one! I was blown away! It even had a nice size 5/16 pilot hole that keeps the bit from going in on angle. On the inside it is also about the same height to keep the valve nice and seated.
I Used the Fuzion Rinseless 1-128

75718757197572075721
Marolex Axel Foamer 7000 with Xiaomi - YouTube (https://www.youtube.com/watch?v=kzUMjx04H8U)
Not easy to demo with Zeus trying to bite the foam:buffing:

[Coatingsarecrack]

When I was deciding where to place the valve I noticed it was already made for one! I was blown away! It even had a nice size 5/16 pilot hole that keeps the bit from going in on angle. On the inside it is also about the same height to keep the valve nice and seated.
I Used the Fuzion Rinseless 1-128

75718757197572075721
Marolex Axel Foamer 7000 with Xiaomi - YouTube (https://www.youtube.com/watch?v=kzUMjx04H8U)
Not easy to demo with Zeus trying to bite the foam:buffing:

Not the best foam. Do you have Frothe or the Adam’s foam to compare?


Sent from my iPhone using Tapatalk

[DanaDetailingPros]

Just Froth. I just' wanted to get the sprayer dialed in. Froth is to $ to waste. I still haven't played with tips yet. Also I got a smoking deal on the Fuzion.
I plan on using the fuzion on my local go to area on rinseless and use the froth for my regulars.
Not to mention my dog wasn't letting me go slow:(

[JustJesus]

Hehe... Zeus. Nice dog.

[DanaDetailingPros]

Hehe... Zeus. Nice dog.
My total pal!!! He goes everywhere with me. He just has to be tied down when I spray anything!