PDA

View Full Version : Silverado facelift



Pages : [1] 2

opie
07-31-2022, 09:43 AM
Finally got my doors repainted, due to clearcoat failure. The drivers side doors had been previously repainted when it had been backed into years ago. So thats the only area that the clear was lifting.

Found some rust starting under the trim pieces where the panel had been body worked. So had to grind all the rust out. Found another little spot behind the front mudflap that needed grinded out and fixed as well.

Also resanded the front grille and had that resprayed. It originally was a chrome grille but I rattle canned colormatched it years ago and held up well but needed freshened up.

Some of the rust could not be ground out deep enough as i was afraid to blow right through the metal and did not want to do any patch work. So found this product called loctite naval jelly rust dissolver. With multiple treatments it removed what rust remained!

I did the prep work. Thanks to my buddy who did the body/paint work. Did great job.

Im leaving the ugly door trim off as it looks so much better now!

I will be in the future doing a full paint correction and then its gettin gyeonized. Last time it was paint corrected/ceramic coated was feb 2019. That was when i just started out with a megs mt300 da and their microfiber pads and d300 coumpound. Oh how ive stepped up my game since then! Lol

Thanks for looking. I will post up some more pics when i paint correct/ceramic coat it.https://uploads.tapatalk-cdn.com/20220731/797f0cb98eb91665afd96966d2a10be5.jpghttps://uploads.tapatalk-cdn.com/20220731/b6c11ed34ba2b34325ce212b1c6989d9.jpghttps://uploads.tapatalk-cdn.com/20220731/e505ed573b15521ba7a5da4b06c60b9d.jpghttps://uploads.tapatalk-cdn.com/20220731/68196f274a0bab9120a74536dfac5c09.jpg

Sent from my SM-S901U using Tapatalk

luckydawg
07-31-2022, 10:51 AM
Big improvement-- good job!!

opie
07-31-2022, 12:24 PM
Big improvement-- good job!!Thankyou! Definately liking the truck again. I was losing interest in it with how terrible those doors and that old shat trim were looking

Sent from my SM-S901U using Tapatalk

Sizzle Chest
07-31-2022, 01:11 PM
Good move with the work\ trim removal!

01GreyStangGT
07-31-2022, 09:48 PM
Major improvement!

Coatingsarecrack
08-01-2022, 12:06 AM
Nice work. Looks newish. Now you’ll enjoy detailing her again.


Sent from my iPhone using Tapatalk

hoyt66
08-01-2022, 05:06 AM
Wow! Impressive for sure!! Looks so much better. Good job!!

opie
08-01-2022, 07:58 AM
Thanks all!

Yes crack i sure will enjoy it again.

Sent from my SM-S901U using Tapatalk

Bobby B.
08-01-2022, 08:48 AM
Great job! The Silverado looks way better now. Enjoy it as long as you can. New trucks are getting ridiculously expensive these days.

opie
08-01-2022, 09:30 AM
Great job! The Silverado looks way better now. Enjoy it as long as you can. New trucks are getting ridiculously expensive these days.They sure are! And more ugly imo lol.

Ive already had it 10 years. Its only got 125,000 miles on it, and only gets a few thousand added every year. Its not a rot box like most of the cat eye bodys are nowadays. The way everything is now i dont see myself getting rid of it for some years yet.

Sent from my SM-S901U using Tapatalk

Eric7810
09-01-2022, 12:05 PM
Keep it on the road man. I have an OBS suburban I am restoring as we speak. Hope to post pics of the project here when done.

Nice work!


Sent from my iPhone using Tapatalk

opie
09-03-2022, 07:17 PM
Finally 2 step correction today, had to wait 30 days post both b4 sealing the paint.

Plan was to use gyeon pure evo, and top with cure for safety as its supposed to rain next couple days. Mother nature gave me a middle finger as i was half done polishing. And continued to sprinkle on and off for the next hour or two.

Quick thinking, i figured id forgo trying to apply pure evo right now and snagged 3d poxy and buzzed around the finished panels. Worked inbetween sprinkles and finished polishing. In the end gave a final wipe down with 3d bead it up.

Figured in a couple weeks or when weather is better i can do a carpro descale, and bilt hamber on the truck and strip the clear bare and apply pure evo then.

Flex rotary rupes blue coarse wool pads 3d aca 510 for 1st step.

Flex supa beast white lc force hybrid pads 3d aat502 for 2nd step.

Honestly didnt think it looked any different until i took a picture of it. And got a compliment when i went to store get some beer.

https://uploads.tapatalk-cdn.com/20220904/29c7d506d4986c9f67f89030033e5ba6.jpghttps://uploads.tapatalk-cdn.com/20220904/e652449c2d7bb5e54b63a34c2b701a86.jpg

Sent from my SM-S901U using Tapatalk

Rsurfer
09-03-2022, 08:23 PM
Looking good. Hard to get light colors to pop.

JDGolden
09-05-2022, 12:28 PM
Beautiful!


Sent from my iPhone using Tapatalk

PA DETAILER
09-05-2022, 12:33 PM
Nice work. With the elevated prices of new and used vehicles, I would be safe to say people are holding on to what they have longer. And spending the money on what they need to keep it or put it right.