Removing CQuartz UK & SiC high spots

[C5Longhorn]

I coated my vehicle today with 2 coats of UK 3.0 and a topper coat of SiC.

I noticed some spots were there was left over wax residue even with a double panel wipe and I expect I will have some high spots to correct.

A couple of questions:

1) Should I knock out any areas that need to be done ASAP?

2) Will I need to polish the whole panel or can I work the spot and surrounding area?

3) Will something like M205 knock out a high spot if I use a white or orange pad?

4) Can I immediately recoat area after I polish and perform panel wipe again?

Thanks,

Rick


Sent from my SHT-W09 using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

[The Guz]

Was it left over polish? What polish did you end up using?

If it is an actual coating high spot, if you catch it relatively soon you can remove it by adding more coating. It also depends if the high spot is from SiC or UK. If it is from UK then get ready to polish that high spot out and recoating the area.

Being that it is fresh you can get away with spot correcting, panel wiping and re-coating.

If you had some Essence Plus, that also works to level out the high spot without reapplying the coating.

[C5Longhorn]

Thanks Guz. I'm going to inspect tomorrow. My lighting wasn't the greatest and I felt rushed frankly since I had to apply the second coat and SiC in 1 hour intervals. The Viper has a lots of scoops and ducts. I do think I will have polish residue in one area.

If I have to repolish, what I have on hand is m205, Griot's perfecting or fast correcting creme, or Sonax Profilene np-03.

Is there one you wood pick out of those? I would pair with a lake country thinpro pad (either white or orange).

Thanks,

Rick

Sent from my SHT-W09 using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

[vaca22]

Thanks Guz. I'm going to inspect tomorrow. My lighting wasn't the greatest and I felt rushed frankly since I had to apply the second coat and SiC in 1 hour intervals. The Viper has a lots of scoops and ducts. I do think I will have polish residue in one area.

If I have to repolish, what I have on hand is m205, Griot's perfecting or fast correcting creme, or Sonax Profilene np-03.

Is there one you wood pick out of those? I would pair with a lake country thinpro pad (either white or orange).

Thanks,

Rick

Sent from my SHT-W09 using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

This is exactly what happened to me, I underestimated the importance of propper lighting. Then one day I walked out of Coscto on a cloudy day with my polarized sunglasses and saw a huge streak running down the passenger door.

Couldn't wait to get home and polish it out.

FYI this may be a crazy thing to say in this community, but I took care of that high spot with a MF towel with a spritz of Hyper Polish on it.

[The Guz]

Thanks Guz. I'm going to inspect tomorrow. My lighting wasn't the greatest and I felt rushed frankly since I had to apply the second coat and SiC in 1 hour intervals. The Viper has a lots of scoops and ducts. I do think I will have polish residue in one area.

If I have to repolish, what I have on hand is m205, Griot's perfecting or fast correcting creme, or Sonax Profilene np-03.

Is there one you wood pick out of those? I would pair with a lake country thinpro pad (either white or orange).

Thanks,

Rick

Sent from my SHT-W09 using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

Either of those polishes will work just fine. So you did 2 layers of UK and 1 of SiC?

[C5Longhorn]

Either of those polishes will work just fine. So you did 2 layers of UK and 1 of SiC?Yes, I did 2 coats of UK and one of SiC. It definitely was a learning experience with the time window. The combo does look really good!

I think my plan should be to wait a week, catalog all the spots I want to correct and then knock them out at one time. I don't think I will find every imperfection trying to rush through today and will just waste another applicator in the process.

Sent from my Pixel 3 XL using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

[The Guz]

You would have been fine with one layer of each.

[2wookies]

You would have been fine with one layer of each.

Lol I’m sorry I laughed at this, there’s so many people wasting time and product doing 3 layers.

[C5Longhorn]

You would have been fine with one layer of each.Yes, I remember your reply from the other thread. I figured the 2nd coat would help even it out if I missed any spots going fast.

Frankly, I could probably have justed used SiC or a sealant\carnuba since the car doesn't see the elements. But l like having a coating on it.

Sent from my Pixel 3 XL using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

[dgage]

Yes, I remember your reply from the other thread. I figured the 2nd coat would help even it out if I missed any spots going fast.

Frankly, I could probably have justed used SiC or a sealant\carnuba since the car doesn't see the elements. But live like having a coating on it.

I was thinking, damn, he’s got some protection now. :) A little overkill but none of us on here have ever done overkill. Nope, not AGO. :)

[C5Longhorn]

Should I use Essence instead of the polishes listed above?

Sent from my Pixel 3 XL using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

[Epilogts]

I’ve had good luck with Essence and a light touch by hand buffing out high spots when necessary.

[The Guz]

Should I use Essence instead of the polishes listed above?

Sent from my Pixel 3 XL using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

Use what you have

[C5Longhorn]

Still have to correct the high spots but looks pretty good.

Biggest lesson learned, I should have just done one coat at a time instead of rushing to hit the 60 minute windows. Also, switch applicators and towels more frequently.
overall.https://uploads.tapatalk-cdn.com/20220130/5ed857334b408fa5333dfae92ed61a2f.jpg

Sent from my Pixel 3 XL using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

[fly07sti]

Still have to correct the high spots but looks pretty good.

Biggest lesson learned, I should have just done one coat at a time instead of rushing to hit the 60 minute windows. Also, switch applicators and towels more frequently.
overall.https://uploads.tapatalk-cdn.com/20220130/5ed857334b408fa5333dfae92ed61a2f.jpg

Sent from my Pixel 3 XL using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

I have a soft spot for this era Viper and yours is very good looking!