View Full Version : Best method/tools/products to use for first in AC vents?
Kris.R
01-26-2022, 10:50 AM
Hey all. I bought a 2002 F150 from the original owner that lived on a farm. Needless to say, the inside of the truck was smothered with dirt from his property. Got most of everything cleaned up but the AC vents have a lot of natural dirt built up from him driving the truck around his property with the windows down :eek:
Any tips on how to attack this would be greatly appreciated!
PS - I’ve tried q-tips and brushes but the dirt is caked pretty good..
Eldorado2k
01-26-2022, 12:18 PM
Buy some foam swabs that look like this. This is what I use on vents to take care of exactly what you’re describing. The brush works “ok” and Q Tips suck, but these swabs work perfectly. Just spray it once with diluted APC and thank me later.
https://uploads.tapatalk-cdn.com/20220126/63d326e0620943bcd0c3c390d7f8a373.jpg
Kris.R
01-26-2022, 01:42 PM
Buy some foam swabs that look like this. This is what I use on vents to take care of exactly what you’re describing. The brush works “ok” and Q Tips suck, but these swabs work perfectly. Just spray it once with diluted APC and thank me later.
https://uploads.tapatalk-cdn.com/20220126/63d326e0620943bcd0c3c390d7f8a373.jpg
Thank you I will look into buying those!
Odrapnew
01-26-2022, 01:50 PM
I've actually had good luck with the cheap foam paint brushes.
They might not be the best, but for less than a $1, they work well.
Something like this.
American-Made Poly Foam Applicator - Wood Handle Foam Paint Brush | Torrington Brush Works (https://www.torringtonbrushes.com/brushes/foam-applicators/poly-foam-applicators-made-in-usa.html)
Bobby B.
01-26-2022, 02:18 PM
Wheel Woolie Vent Brush and a can of Stoner E-Z Gust will help remove the dirt from the vents.
Stoner E-Z Gust Pressurized Air: Blast dust, dirt out of crevices with a gust of clean air! air dust, stoner dust can (https://www.autogeek.net/ezgust.html)
Kris.R
01-27-2022, 12:26 AM
I've actually had good luck with the cheap foam paint brushes.
They might not be the best, but for less than a $1, they work well.
Something like this.
American-Made Poly Foam Applicator - Wood Handle Foam Paint Brush | Torrington Brush Works (https://www.torringtonbrushes.com/brushes/foam-applicators/poly-foam-applicators-made-in-usa.html)
I’ll try it out! Thanks
Kris.R
01-27-2022, 12:26 AM
Wheel Woolie Vent Brush and a can of Stoner E-Z Gust will help remove the dirt from the vents.
Stoner E-Z Gust Pressurized Air: Blast dust, dirt out of crevices with a gust of clean air! air dust, stoner dust can (https://www.autogeek.net/ezgust.html)
I’ll look into this as well. Thanks!
hoyt66
01-28-2022, 05:49 AM
On extremely dirty hard to get at areas I use a paint or detailing brush saturated with apc. After brushing out area hit it with some compressed air-repeat until clean
Kris.R
01-28-2022, 10:04 AM
On extremely dirty hard to get at areas I use a paint or detailing brush saturated with apc. After brushing out area hit it with some compressed air-repeat until clean
Thats a good idea! Thanks
Eldorado2k
03-22-2022, 02:59 AM
This is the type of dirt you can clean out with the swabs and a bit of APC.
https://uploads.tapatalk-cdn.com/20220322/8a28c006556cc0337ee66e40c81657d8.jpg
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.