PDA

View Full Version : 2006 Jeep Wrangler gets Restored


TTQ B4U
12-13-2021, 07:16 AM
So the Jeep is all completed and delivered. Such a great vehicle for a super couple. Neighbors of ours that are in the upper 60's. It's a 2006 model year purchased late summer 2005 finished in Flame Red Clearcoat over black cloth interior and has just over 42k miles on it.

The story here is the vehicle was a 50th B-Day gift from her husband as she wanted to have some topless fun in the summertime and the ability to navigate around town with ease. It's all locally driven and impeccably maintained. She is adamant that she will never sell it thus wanted it cleaned up like new inside and out. Mission Accomplished!

This was Basic Polish & Protect with a dual-layer ceramic coating for the painted surfaces. They also opted for the glass polish and coating, wheels to be coated and the roof to be cleaned and sealed too. Last on the exterior but really most important was the restoration of the greyed-out trim and then locking it all in with a trim-specific coating so it will stay as shown here, dark and luxurious like new.

Thanks for viewing!


Process Included:



Wash & Decon with Iron X and a Medium Nano Mitt
Polished with a Flex XCE Polisher, Yellow Rupes Mille Pads, CarPro Essence then topped with 2 layers of CarPro SiC
Trim & Bumpers restored with Polytrol Oil then topped with CarPro Dlux
Wheels polished with GYEON Primer and topped with GYEON Q2 RIM
Roof cleaned and sealed with RaggTopp Cleaner and Sealant
Underside and wheels dressed with Megs Hyperdressing and sprayed with a paint gun





I'm not gonna lie, I really dig this one. From the manual windows to the basic simplicity and the fact that it's so dang maneuverable. Would be a lot of fun for around town. Love that it's the 4.0l too.

https://pbase.com/timothylauro/image/172195258/original.jpg


I did convince the owner to remove the front plate too. Now it looks so clean.


https://pbase.com/timothylauro/image/172195262/original.jpg


https://pbase.com/timothylauro/image/172195260/original.jpg



It came out SUPER Clean and nice even underneath. Really helps that it's been a mall-crawler not a rock crawler.


https://pbase.com/timothylauro/image/172195263/original.jpg


https://pbase.com/timothylauro/image/172195261/original.jpg


https://pbase.com/timothylauro/image/172195259/original.jpg


90-95% paint corrected. Keep in mind, at this age, it's about paint preservation so there's no need to chase every random scratch.

https://pbase.com/timothylauro/image/172195256/original.jpg



SO CLEAN and so nice looking. Never been a huge fan of Red on Jeeps but this one gave me The Buckeye Spirit.


https://pbase.com/timothylauro/image/172195254/original.jpg






It was brought to me in good shape but in bad need of a strong clean up and trim restoration.


https://pbase.com/timothylauro/image/172195253/original.jpg



The trim responded very nicely to the restoration. Here it is prior to the ceramic over top which also darkens it a bit more.


https://pbase.com/timothylauro/image/172195267/original.jpg



The top was another area that needed a strong cleaning and was due for a refreshing sealant. 3 layers of water repellent and nourishing of the material done!


https://pbase.com/timothylauro/image/172195265/original.jpg


https://pbase.com/timothylauro/image/172195264/original.jpg


Finally, the metal bumpers needed restored as well. Here too, the paint dries out and needs nourished. Putting the oils back in helps darken it up, repels moisture and brings them back to new. Once cured, they are then ceramic coated to lock in the efforts.

https://pbase.com/timothylauro/image/172195257/original.jpg
JDGolden
12-13-2021, 08:25 AM
Looks excellent and I bet they’re thrilled. It looks like it came out of a time machine. Flame red is a classic Jeep color, especially on the TJ. Sure is hard to beat the gloss of bright red. The trim and top results steal the show on this one. As for polytrol oil, any reason you used that over solution finish? Just making some notes.

Btw, much cleaner than my 17. But I’ve taken it through some stuff :)
TTQ B4U
12-13-2021, 09:30 AM
Looks excellent and I bet they’re thrilled. It looks like it came out of a time machine. Flame red is a classic Jeep color, especially on the TJ. Sure is hard to beat the gloss of bright red. The trim and top results steal the show on this one. As for polytrol oil, any reason you used that over solution finish? Just making some notes.

Btw, much cleaner than my 17. But I’ve taken it through some stuff :)

Thanks! They were thrilled. She is a super nice lady and being older, I give her credit for hopping up in it. She's short and not the most spry lady out there but she considers it worth the effort :xyxthumbs:

I chose Polytrol as it's compatible with metal and goes on clear and in general is designed to "penetrate" and re-nourish the pigments. On metal it also acts as a rust inhibitor. SF is a great product, is a little easier to work with but from an actual chemical process standpoint, I don't think it does exactly what Polytrol does in terms of penetration and actually restoring the oils and luster to the actual pigments in the plastics. They say it restores the oils but you can see polytrol absorb in vs SF that tends to stay mainly on top. In the end I use both but SF more on lighter needs. Once both are dry, I always coat them with a ceramic like Dlux.

I restored a 10yr old plastic storage unit we keep some cushions in on our patio and it's been done for 2yrs; sits outside 24x7 even in winter and still looks amazing. Did it with Polytrol. It works on ALL colors except white as it has no pigment.
oneheadlite
12-13-2021, 12:11 PM
... She is adamant that she will never sell it thus wanted it cleaned up like new inside and out. Mission Accomplished!
...

Sorry sir, but I have to cry false on that one.

They never looked that good new. :laughing: :props:
PA DETAILER
12-13-2021, 12:19 PM
Nice work. Nice JEEP. Had a 05 RUBICON. The TJ'S were simple and a great vehicle.
JDGolden
12-13-2021, 12:24 PM
Thanks! They were thrilled. She is a super nice lady and being older, I give her credit for hopping up in it. She's short and not the most spry lady out there but she considers it worth the effort :xyxthumbs:

I chose Polytrol as it's compatible with metal and goes on clear and in general is designed to "penetrate" and re-nourish the pigments. On metal it also acts as a rust inhibitor. SF is a great product, is a little easier to work with but from an actual chemical process standpoint, I don't think it does exactly what Polytrol does in terms of penetration and actually restoring the oils and luster to the actual pigments in the plastics. They say it restores the oils but you can see polytrol absorb in vs SF that tends to stay mainly on top. In the end I use both but SF more on lighter needs. Once both are dry, I always coat them with a ceramic like Dlux.

I restored a 10yr old plastic storage unit we keep some cushions in on our patio and it's been done for 2yrs; sits outside 24x7 even in winter and still looks amazing. Did it with Polytrol. It works on ALL colors except white as it has no pigment.

Thank you, that was a good explanation and something to keep in mind.


Sent from my iPhone using Tapatalk
Kamakaz1961
12-13-2021, 02:54 PM
Beautiful work! KEEP ON ROCKING!
hotrodn
12-13-2021, 04:12 PM
TRIME WORK NICE!
Sizzle Chest
12-13-2021, 07:44 PM
Very nice work! Looks super!
KilltheScene
12-20-2021, 07:49 PM
I plan on doing exactly what you did with the trim this Spring. Everything I've done with trim thus far lasts two weeks and it's time I made the leap to this.

I wanna toss this out as an alternative with your tires. Pick up some Sonax Tire Gloss Gel, apply with any microfiber applicator pad when the car itself is complete. Drive the car 3 to 5 miles, return home, then wipe each tire down again with a dry MF towel. I think this would compliment the work you're doing here to the "T" and I think your customers will notice this very thing.
TMQ
12-20-2021, 08:17 PM
Geez...great work!

Learned so much from you and Mr Sizzle!

Thanks for sharing!

Tom
JuziWol
12-21-2021, 03:02 AM
Looks excellent! Very nice work! The color is just excellent. It really feels like it's as it was more than 15 years ago.
hollerstiltner
12-22-2021, 09:42 PM
Fantastic work! And I agree on loving the simplify of some cars. It can be refreshing to have a vehicle that’s just a great uncomplicated car.

Now I have to find this polytrol to try on my deck chairs.


Sent from my iPhone using Tapatalk
PA DETAILER
12-23-2021, 06:43 AM
Here is a 2001 TJ Sahara with 9,762 miles for sale locally!
2001 Used Jeep Wrangler Sahara TJ at Jim Babish Auto Sales Inc. Serving Johnstown, PA, IID 21072064 (https://www.jimbabishauto.com/details-2001-jeep-wrangler-sahara_tj-used-1j4fa59s41p323401.html)
Bill1234
01-01-2022, 05:02 PM
Looks great , would tell the owner to add a can off seafoam to the gas tank and if they are mechanically inclined and know how and when to change oil to their crank case immediately before it gets changed. Seafoam will flush out any old stuff and be ready for new oil but the change must happen within little miles otherwise engine issues will occur.

While EVS are taking over I miss straight 6s. Wish Ford did a hybrid 300 i6 that has dual turbos, etc etc. Power nation got like 500 hp out of one