Master Blaster MB-3CD vs 36V Leaf Blower ?

[BobWhite]

I have Makita cordless hand held tools, one of which is an 18V blower, 219mph/113 cfm. It is basically a small leaf blower. Concentrated air into a small tube, creating speed, but not much volume.

While it works well on wheels and in getting some water off the vehicle, it doesn’t get it all off and I generally have to lightly run a BMF towel over it to dry completely.

I was thinking about getting an 36V Makita blower 120 mph/473 cfm for about $130. This is a full size leaf blower.

Has anyone used this or a different full size cordless blower and has anyone used it in comparison to say a Master Blaster MB-3CD?

The MB is almost 4 times as expensive, so if the battery blower works just as well, it obviously makes more sense.

[2black1s]

I use a B&D BV6600 corded blower. It's variable speed with velocities from 140-250 mph. I can't find the CFM spec but I think it's in the 400 neighborhood. Cost right around $100.00.

My experience with blowers is that corded models significantly outperform battery models. I have a cordless WORX blower that I use in my woodshop but it is practically useless when it comes to drying a car.

[dgage]

My experience with blowers is that corded models significantly outperform battery models. I have a cordless WORX blower that I use in my woodshop but it is practically useless when it comes to drying a car.

The Worx blower isn’t in the same zip code as the latest Ego blowers in terms of motor power or battery power. While I agree with you they won’t have the power density of a wall outlet, if I didn’t have a dedicated car dryer, I’d still pick the Ego 10 times out of 10 vs my Toro blower that I use for leaf vacuuming now. No way would I deal with a power cord for just a little more power.

[BobWhite]

The Worx blower isn’t in the same zip code as the latest Ego blowers in terms of motor power or battery power. While I agree with you they won’t have the power density of a wall outlet, if I didn’t have a dedicated car dryer, I’d still pick the Ego 10 times out of 10 vs my Toro blower that I use for leaf vacuuming now. No way would I deal with a power cord for just a little more power.

Yup, a Worx blower is not even the same ballpark as the Makita. I’m quite sure the 36V Lithium Ion one will easily keep up with many hand held gas blowers (I have a Stihl, but wouldn’t dare use a gas one on my cars).

Im just looking to find out if the big tube of the battery blower will force enough air in comparison to the MB one, which is heavily stepped down from a large tube, thus forces more air into a smaller outlet.

[UncleDavy]

I use the McKees 37 Turbocar dryer and although it can be a bit cumbersome, it is a great dryer. I would prefer a cordless unit but I like the fact that the air is filtered. Leaf blowers are certainly powerful enough but they are not filtered and you can risk the chance of debris in the air.

[John U]

I use a Master Blaster at one home and blower at another. No comparison...pay more, get more.

[BobWhite]

I use a Master Blaster at one home and blower at another. No comparison...pay more, get more.

How big is the blower?

[ducksfan]

I just bought the Makita. But I haven't had a chance to use it yet. I actually didn't buy it to get the blower. Amazon had it with (4) 5ah batteries and a charger for $329. I needed the batteries and they were about $100 a piece. So, I figured a free charger and blower, why not?

I also have a 2 motor metrovac blower. So, if I get the time and remember, I'll post back here later.

I really like the Makita 18v LXT system/tools and that's a good way to get (4) really good, high Ah batteries and a charger.

[Luket]

Luv my master blaster A must have. When hanging on a garage wall with a extended hose. The use is unlimited. Blow my driveway. Clean filters. On and on.

[DetailKitty]

Toro leaf blower… $40.
6+ years old and still kills it.

[John U]

How big is the blower?

8 hp peak, 4 hp blower & 4 hp heated air.. You need 220 volts to run both together.
58,500 ft of air per minute

[dgage]

I’ve got the Big Boi Blowr Pro and like it a lot. Much better hose than the Master Blaster. Night and day difference compared to a leaf blower.

[DFB]

I used the small Makita blower fitted with the 5.0Ah battery for a while, it worked decently well at getting most of a car dry before going over with a towel and drying aid.

https://i.postimg.cc/x16TKF3D/may1920.jpg (https://postimg.cc/pmnHvCSq)

I then started using a Stihl BGA56, the lack of a focused nozzle meant it was ok but nothing more. I do occasionally use this when I'm pressed for time.

https://i.postimg.cc/zXJKxLQV/IMG-4863.jpg (https://postimg.cc/23K165rD)

I upped the ante with a Big Boi mid last year.

https://i.postimg.cc/ydhGT8Z7/jul124.jpg (https://postimg.cc/LYXv9RDW)

https://i.postimg.cc/SKYr51XT/oct63.jpg (https://postimg.cc/NyYm24km)

As mentioned above, the difference in a purpose built machine is quite big. The smaller nozzle compared to a leaf blower just makes it more efficient and moving water from the car.

[TTQ B4U]

I use a 60v Green Works blower and its super powerful and will dry vehicles with ease. IMO leaf blowers are far more effective than the tiny expensive blowers for detailing as they move more cubic feet of air. When done, I usually grab my air compressor blower to get the grill work and small ares clear.

74398

[Luket]

Some master blasters heat the air. Ceramic coating and a master blaster. Makes towel free efficient drying easy.