1st time using a DA [flex xfe 15] on '67 Chevelle and '60 Porsche

[bb67hd]

I completed paint correction on both my collectors using my new flex xfe-15 ---never used a polisher before .
I tried megs uc and up with lc flats and lc force hybrids 5.5 6.5" ,, tried megs 105& 205 then tried 7" soft buff pads .
I liked the soft buff & 105/205 the best --a little more messy but better results and rotation was real good .
I did use about 7 pads for each compound per car so I now have a lot of pads & Put megs ultimate wax on both after a day topped w/ pinn. souveran on the porsche and pinn ssII on the chevelle.a week later put megs # 26 paste on a few panels to compare could and not tell a diff.
Anyways the "finisher" worked just fine for these cars.

[bb67hd]

I could not get photos to load on here but I could on team chevelle ---
here is the link

'67 after compound/polish detail | Team Chevelle (https://www.chevelles.com/threads/67-after-compound-polish-detail.1140628/)

[Mike Phillips]

Awesome looking Chevelle!


https://www.chevelles.com/attachments/1624981413156-png.715318/

https://www.chevelles.com/attachments/1624981435441-png.715319/

https://www.chevelles.com/attachments/1624982069106-png.715320/



Pictures are really difficult for most people on vBulletin style discussion forums. I when to the link, right >clicked< on each of the photos to get the URL code and even then I had to dissect and remove a lot of extra code to get them to display properly.


Also thanks for sharing your feedback about the FLEX Finisher. I never try to remember the part numbers, instead this tool has a "nickname" that is OFFICIAL with the FLEX company. It shows the XFE7-15 to be the "Finisher" in the FLEX catalog.


Here's the store page for this tool on Autogeek.com


FLEX "The Finisher" XFE7-15 Long Stroke Orbital Polisher (https://www.autogeek.net/flex-xfe7-15-orbital-polisher.html)


It's a 15mm FREE spinning random orbital polisher. I like how smooth it is but prefer gear-driven orbitals for speed. But that's just me.


Thanks for sharing...

:)

[bb67hd]

Thanks Mike !

You can Delete the 2nd post as you were able to upload my photos --

I really liked using the "finisher" really never a problem with rotation ---it did slow down in some curved areas but was always able to move/ angle it to keep rotating and did take about every single swirl out.

I don't know why but the megs 7" soft buff pads maroon/yellow and the 105/205 compounds worked the best !
Those 7" soft buff pads say for rotory use but fit the 6" finisher plate perfect and worked great.

P.S. The paint is bc/cc from 1994

[Mike Phillips]

I really liked using the "finisher" really never a problem with rotation ---it did slow down in some curved areas but was always able to move/ angle it to keep rotating and did take about every single swirl out.




Copy that... I always say,

If you spend enough time with ANY tool you can make it dance on paint!





I don't know why but the megs 7" soft buff pads maroon/yellow and the 105/205 compounds worked the best !

Those 7" soft buff pads say for rotory use but fit the 6" finisher plate perfect and worked great.




I've had the best luck using the larger, optional 6" backing plate on the FINISHER and then using Lake Country 6.5 Force Hybrid white/polishing and black/finishing pads. The thicker foam and it's MASS seem to help maintain pad rotation via inertia.







P.S. The paint is bc/cc from 1994



Wow!

That's 27 years in car years!


Most car clubs consider a car an antique after 25 years, some even say after 20 years - so you have some antique bc/cc on that car and it looks marvelous!


:cheers:

[JDGolden]

That chevelle is gorgeous and I love the color. Nice job!

[John U]

Sounds like you mastered the rotation. My friend called in a panic the first time using a DA.... it was “wagging” him around. I went over and grabbed it with one hand and showed how smooth it worked.
He then mastered the rotation!

[Sizzle Chest]

Nice work on some VERY nice rides!

[Coatingsarecrack]

She’s beautiful. What motor in there?


Sent from my iPhone using Tapatalk

[Mike Phillips]

Sounds like you mastered the rotation.

My friend called in a panic the first time using a DA.... it was “wagging” him around. I went over and grabbed it with one hand and showed how smooth it worked.

He then mastered the rotation!




Nice. :xyxthumbs:

Each one teach one...


There's a member on this forum, his name is Rick, he's a more seasoned detailer. He attended my Texas Roadshow Class back in 2019 and out of all the tools he used in the class he chose the FLEX Cordless Finisher. Then using good technique to maintain pad rotation, the Buff and Shine Uro-Tech pads and Lake Country 6.5" Force Hybrid Pads plus great abrasive technology he remove all the HOLOGRAMS out of his 1967 GTO



Removing swirls out of a 1967 Pontiac GTO by Rick (https://www.autogeekonline.net/forum/pictures-2-day-roadshow-car-detailing-classes/123396-10-cars-detailed-2-days-texas-roadshow-detailing-class-3.html#post1637909)


http://www.autogeekonline.net/gallery/data/3836/67_GTO_02.jpg

http://www.autogeekonline.net/gallery/data/3836/67_GTO_03.jpg



Upon seeing his work with the FLEX Finisher, another car guy hired him to de-swirl his old 2-door Chevy,


My First Detail Job Other than my own cars! ( Long Post) (https://www.autogeekonline.net/forum/show-n-shine/124519-my-first-detail-job-other-than-my-own-cars-long-post.html?highlight=#post1650438)

http://www.autogeekonline.net/gallery/data/500/1967_Corvette.jpg


Rick's an inspiration to all of us...

http://www.autogeekonline.net/gallery/data/3836/Austin_Detail_Class_034.jpg




Point being, any free spinning random orbital polisher can get the job done, you just need to spend time with the tool and become good with it.





:)

[bb67hd]

She’s beautiful.

What motor in there?



Hey thanks!

Block = 1970 L34
Heads are 1967 215's
Engine looks stock -- less headers
1967 L78/L34 1111170 dist , 242 coil
1968 3310 Carb
Vintage eddy C396 intake
M20 original 1967 Muncie console shifter
1967 12bolt 3:73's

She runs low 13,s @ 106+ with full exhaust, factory tail pipes and skinny redline tires.


Im the MAN Im the MAN Im the MAN Im the MAN

[Coatingsarecrack]

Hey thanks!

Block = 1970 L34




L34..... is that a 396?


Sent from my iPhone using Tapatalk

[Paul A.]

First time user? Phenomenal results!!!

Feels good to do that yourself, huh?

[bb67hd]

[QUOTE=Coatingsarecrack;1720527]L34..... is that a 396?

Yep baby big block

L35 = 325 hp 396
L34 = 350 hp 396
L78 = 375 hp 396
L78 396 in the 1965 mid year corvette or commonly called 65 1/2 corvette was 425 hp

[bb67hd]

First time user? Phenomenal results!!!

Feels good to do that yourself, huh?

Dang right!!!

As you all here know , it sure is a lot of work start to finish!!