View Full Version : Applying Jescar powerlock with SUPA Beast
Wildone
04-09-2021, 01:29 PM
Is there a current pad recommendation other than what I have for applying sealants . I have the blue course Rupes but the reading I have done here seems to indicate that this is for the polishing step. I also have on hand Orange and white LC forced, B&S black microfiber polishing pads. Thanks
Rsurfer
04-09-2021, 01:33 PM
Jescar Powerlock has a new name and look. Someone mentioned that the new formula is more durable, dunno.
MisterSnoop
04-09-2021, 02:56 PM
There's ultra lock + now, which is a ceramic version of power lock +.
PROTECTION – Jescar Finishing Products (https://jescarfinishing.com/collections/surface-protection-cleaning-products)
Rsurfer
04-09-2021, 05:43 PM
There's ultra lock + now, which is a ceramic version of power lock +.
PROTECTION – Jescar Finishing Products (https://jescarfinishing.com/collections/surface-protection-cleaning-products)
Went to that link and it seems Power Lock is still available.
Wildone
04-10-2021, 04:50 PM
Tried the ultra lock plus today. I did it by hand the stuff is pretty thin and runny. I was worried about slingin it all over the place if I used the machine. Went on easy and the wipe off is crazy easy and no dust at all. Gloss was really nice as well. Compounded and sealed the t-top today. New flex rotary due in on Tuesday and good timing, the old rotary took a dump half way up the starboard gunwale.
Wildone
04-10-2021, 04:53 PM
Also- I noticed the less plush the microfiber the better the take off was.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.