psnt1ol
04-01-2021, 07:58 PM
I got a call 2 days ago from a client whom I coated his 991 4S last year. He told me his car got vandalized and he was wondering if I knew of any reputable Porsche body shop. The quote he was given locally was anywhere from 1K to 1.5K for a respray.
The damage was on the rear wing. He agreed to let me take a crack at it knowing at worst.... he will do the repaint which he doesnt really want since he wants to keep the original paint work intact.
https://i.ibb.co/c1TWqSs/scratches-before.jpg
When I got there and took a closer look at the scratches. A bit of white powdery/crystalized substance came off the scratches as I ran my finger on it. Here is what one of the scratches looked like under a microscope.
https://i.ibb.co/Yk4TYGJ/1617301048149.jpg
https://i.ibb.co/z5N1Vry/1617300975741.jpg
I might be wrong but I was pretty certain the crystallization in the image is the coating being compromised. I wet sanded the area (from 2000,3000, 4000) then compound and polished. Needless to say, I was planning to recoat the rear wing.
After... what scratches???
https://i.ibb.co/bJ2K61j/Attach0-14.jpg
The client was so happy that he immediately wanted me to do touch up on a few rock chips and a coating topper.
Several hours later.
https://i.ibb.co/9pNmHjx/Attach0-16.jpg
https://i.ibb.co/74bZsxb/Attach0-19.jpg
https://i.ibb.co/6P0nrM9/Attach0-9.jpg
https://i.ibb.co/6WWSrF4/Attach0-13.jpg
https://i.ibb.co/DKP0H5D/Attach0-12.jpg
I really never talk big about the hardness of any coatings I installed but I think the coating on the vehicle prevented this situation from bad to worst.
Tools and Liquids
KXK Rids stick
MIRKA Abralon Sanding Discs (2000, 3000, 4000)
3D One
GG G8
LC Forced Hybrid pads 3.5" (Grey, white)
Carpro 3.5" Gloss Pad
Carpro Essence (rear wing)
Carpro CQUK (rear wing)
Carpro Reset
Carpro Trix
Carpro CQ Lite (topper)
The damage was on the rear wing. He agreed to let me take a crack at it knowing at worst.... he will do the repaint which he doesnt really want since he wants to keep the original paint work intact.
https://i.ibb.co/c1TWqSs/scratches-before.jpg
When I got there and took a closer look at the scratches. A bit of white powdery/crystalized substance came off the scratches as I ran my finger on it. Here is what one of the scratches looked like under a microscope.
https://i.ibb.co/Yk4TYGJ/1617301048149.jpg
https://i.ibb.co/z5N1Vry/1617300975741.jpg
I might be wrong but I was pretty certain the crystallization in the image is the coating being compromised. I wet sanded the area (from 2000,3000, 4000) then compound and polished. Needless to say, I was planning to recoat the rear wing.
After... what scratches???
https://i.ibb.co/bJ2K61j/Attach0-14.jpg
The client was so happy that he immediately wanted me to do touch up on a few rock chips and a coating topper.
Several hours later.
https://i.ibb.co/9pNmHjx/Attach0-16.jpg
https://i.ibb.co/74bZsxb/Attach0-19.jpg
https://i.ibb.co/6P0nrM9/Attach0-9.jpg
https://i.ibb.co/6WWSrF4/Attach0-13.jpg
https://i.ibb.co/DKP0H5D/Attach0-12.jpg
I really never talk big about the hardness of any coatings I installed but I think the coating on the vehicle prevented this situation from bad to worst.
Tools and Liquids
KXK Rids stick
MIRKA Abralon Sanding Discs (2000, 3000, 4000)
3D One
GG G8
LC Forced Hybrid pads 3.5" (Grey, white)
Carpro 3.5" Gloss Pad
Carpro Essence (rear wing)
Carpro CQUK (rear wing)
Carpro Reset
Carpro Trix
Carpro CQ Lite (topper)