Mike Phillips
03-30-2021, 01:30 PM
Review: Marine 31 Vessel Coat UV Pro (https://www.autogeekonline.net/forum/product-reviews-by-mike-phillips/128853-review-marine-31-vessel-coat-uv-pro.html)
Marine 31 Vessel Coat UV Pro
http://www.autogeekonline.net/gallery/data/4245/Marine_31_Vessel_Coat_000.JPG
What is it?
Nano ceramic coating specifically formulated for gelcoat surfaces.
What does it do?
Seals the surface with a high solids concentration of nano sized silicon dioxide or SiO2.
When do I use it?
For both new and older boats, first perform any gelcoat correction and/or polishing work to perfect the gelcoat surface and after using the Marine 31 Prep Spray to remove any residual polishing oils.
Why should I use it?
Marine 31 Vessel Coat UV Pro out lasts and out protects conventional boat waxes and sealants. Makes washing and drying faster and easier in the future.
From the manufacturer
Marine 31 Vessel Coat UV Pro
Marine 31 Vessel Coat UV Pro is designed to create extreme hydrophobicity, allowing for a slick finish. Formulated to work with gel coat surfaces, clear coat, plastic and meals, Marine 31 Vessel Coat UV Pro can be used for a variety of different surfaces, including those in direct sunlight. Plus, Marine 31 Vessel Coat UV Pro is easy-to-apply with a slow flash time so that you can have a larger working area.
DIRECTIONS
For best results, ensure surface is clear of oxidation, swirls, and scratches.
Compound and polish gel coat if necessary.
Use Marine 31 Gel Coat Prep Spray to remove any remaining polishing oils.
Using a microfiber applicator, apply Marine 31 Vessel Coat UV Pro to the surface in a back and forth, crosshatch pattern.
When flashing has occurred, you are clear to wipe away excess product.
Repeat around entirety of vessel.
Marine 31 Vessel Coat UV Pro can be layered, with 3 coats being ideal.
Allow at least 1 hour between layers. Coating cures in approximately 24-48 hours with full coating effectiveness being achieved at 1 week.
Testing the coating and prepping for a boat detailing class
So the timing for the launch of this product came the week before my big 2-day boat detailing class. I was fortunate to have 2 extremely oxidized center console boats in the garage. Because these boats are for hands-on training purposes - I'm only going to do a Test Spot on each boat to dial-in the process for the class to duplicate. As such, I only used this brand new coating on two sections.
That said, these two sections I corrected and coated were more than enough real-estate for me to use the product and get a feel for it's application characteristic as well as final results.
Here's the Conch27 in the condition it arrived in. To the untrained eye - she looks pretty sweet!
http://www.autogeekonline.net/gallery/data/4245/2021_Boat_Class_0001.JPG
Still looks good from this angle... and there's Yancy getting some video of the before condition.
http://www.autogeekonline.net/gallery/data/4245/2021_Boat_Class_0002.JPG
And from this far shot - most people would think this boat is in good, even great condition.
http://www.autogeekonline.net/gallery/data/4245/2021_Boat_Class_0002c.JPG
But to really get a feel for just how badly the gelcoat on this boat has oxidized - you need the right perspective.
From this close with some light on the side of the hull - do you see it?
http://www.autogeekonline.net/gallery/data/4245/2021_Boat_Class_0003.JPG
This boat is severely oxidized. With some good lighting you can see where the dark blue gelcoat has actually turned white.
http://www.autogeekonline.net/gallery/data/4245/2021_Boat_Class_0004.JPG
Now you can really see the true condition...
http://www.autogeekonline.net/gallery/data/4245/2021_Boat_Class_0005.JPG
Here's the tools, products and pads I'll use for my Test Spot and if it works wonders - this will also be the process the class will use over the entire boat.
http://www.autogeekonline.net/gallery/data/4245/2021_Boat_Class_0007.JPG
And here's the results after removing the oxidation, polishing the gelcoat to a high gloss and then sealing the gelcoat with the NEW Marine 31 Vessel Coat UV Pro
http://www.autogeekonline.net/gallery/data/4245/2021_Boat_Class_0006c.JPG
Day and Night Difference
You can easily see the deep, dark richness of the original factory dark blue color for the Conch27
http://www.autogeekonline.net/gallery/data/4245/2021_Boat_Class_0006.JPG
Video Review
https://youtu.be/lS0hm4jNNxY
Written Review
This new coating is easy to use. And the time to use it is when your boat is brand spanking new. Why? Because when a boat is brand new the gelcoat finish is in perfect condition. There's no hard work to do, simply do a light polishing to ensure the gelcoat surface is absolutely clean and free from any previously applied waxes or even spray detailers, (from the boat dealership or the boat factory), then use the Marine 31 Prep Spray to remove any polishing oils and next - install the Marine 31 Vessel Coat UV Pro.
And here's the good news! This Marine 31 ceramic coating will far outlast any conventional boat wax or sealant. But the time to coat your boat is when it's brand new. If you have an older boat, you can still get the long lasting protection and hydrophobic characteristics from the Marine 31 Vessel Coat UV Pro - BUT... like I did in my Test Spot - you'll have to first perform any gelcoat correction work to remove the oxidation and other surface defects.
Application
The coating itself, like most coatings is a thin, clear liquid, like a fine, highly spun oil. After first priming your applicator pad the coating glides over the surface with ease. There's no stickiness to it and because of the extended flash time or evaporation rate, you have plenty of time to tackle a large section making a crosshatch pattern. While the marketing copy states you can tackle up to a 6' by 6' section at one time with a waiting time of 4-5 minutes (flash time), before you need to start leveling the coating and wiping off the excess, I prefer to work smaller areas, about 2' x 2' just because it's a lot easier to manage a smaller section and do a GREAT job of applying and removing the coating than to tackle a really large size, (and 6' x 6' is a LARGE size), and risk doing less than stellar work. This type of marine detailing project is intense and it's really something you need to get right the first time.
Wipe-off
If you're brand new to marine coatings and even automotive coatings for that matter - in case you didn't know, the wiping off aspect of installing a coating is also part of the installing process.
Say what?
That's right. When you wipe the treated area with a clean, microfiber towel, "yes" you are removing the excess but in the process you're also PUSHING the excess over the surface and this has a LEVELING effect, which ensures uniform coverage over the entire section just coated. The wipe-off aspect is just as important as the installation step because you're creating a uniform layer of protection and also visual perfection. The good news is due to the long flash time, evening out the coating and wiping off any last remaining coating residues is a breeze. And the results? A totally clear, high gloss, slick surface that looks better than new. AND - these results will last far longer than the alternatives to a ceramic boat coating, conventional marine waxes and sealants.
How long will the Marine 31 Vessel Coat UV Pro last?
The company says this coating will easily last up to one year but that's as far as they want to claim because there's too many factors that affect how long ANYTHING lasts in the marine environment. For example a salt water environment is a lot more harsh and corrosive than a fresh water environment. Length of time in the water is also a factor. The coating on a boat that is stored in a Boat Barn or on a lift when not in use will easily last longer than the coating on a boat left in the water 24 hours a day, 7 days a week. A good one year of protection is still much longer than a conventional boat wax or sealant no matter how you look at it. And... if you do remove your boat from the water when not in use and wash her down after each boating trip, you could get up to 2 years of protection before you have to re-apply.
New Boats
If you have a brand new boat - NOW is the time to use Marine 31 Vessel Coat UV Pro - while the boat is still in factory new condition exposure to the water, sun and the elements take their tool and cause oxidation.
Older boats
If you have an older boat that you plan on detailing to bring back the shine, then after all the hard work is done, switch over to a ceramic coating to maximize the results from all your hard work.
Nothing wrong with conventional boat waxes and sealants, they are easier to work with than coatings but the lack the longevity of the Marine 31 Vessel Coat UV Pro. Plus because the Marine 31 Vessel Coat UV Pro last longer and creates a super hydrophobic surface that repels dirt, grime and water - your boat will stay cleaner longer and be much faster and also easier to wash and dry after a day of boating fun.
On Autogeek.com
Marine 31 Vessel Coat UV Pro (https://www.autogeek.net/marine-31-vessel-coat-pro.html)
:)
Marine 31 Vessel Coat UV Pro
http://www.autogeekonline.net/gallery/data/4245/Marine_31_Vessel_Coat_000.JPG
What is it?
Nano ceramic coating specifically formulated for gelcoat surfaces.
What does it do?
Seals the surface with a high solids concentration of nano sized silicon dioxide or SiO2.
When do I use it?
For both new and older boats, first perform any gelcoat correction and/or polishing work to perfect the gelcoat surface and after using the Marine 31 Prep Spray to remove any residual polishing oils.
Why should I use it?
Marine 31 Vessel Coat UV Pro out lasts and out protects conventional boat waxes and sealants. Makes washing and drying faster and easier in the future.
From the manufacturer
Marine 31 Vessel Coat UV Pro
Marine 31 Vessel Coat UV Pro is designed to create extreme hydrophobicity, allowing for a slick finish. Formulated to work with gel coat surfaces, clear coat, plastic and meals, Marine 31 Vessel Coat UV Pro can be used for a variety of different surfaces, including those in direct sunlight. Plus, Marine 31 Vessel Coat UV Pro is easy-to-apply with a slow flash time so that you can have a larger working area.
DIRECTIONS
For best results, ensure surface is clear of oxidation, swirls, and scratches.
Compound and polish gel coat if necessary.
Use Marine 31 Gel Coat Prep Spray to remove any remaining polishing oils.
Using a microfiber applicator, apply Marine 31 Vessel Coat UV Pro to the surface in a back and forth, crosshatch pattern.
When flashing has occurred, you are clear to wipe away excess product.
Repeat around entirety of vessel.
Marine 31 Vessel Coat UV Pro can be layered, with 3 coats being ideal.
Allow at least 1 hour between layers. Coating cures in approximately 24-48 hours with full coating effectiveness being achieved at 1 week.
Testing the coating and prepping for a boat detailing class
So the timing for the launch of this product came the week before my big 2-day boat detailing class. I was fortunate to have 2 extremely oxidized center console boats in the garage. Because these boats are for hands-on training purposes - I'm only going to do a Test Spot on each boat to dial-in the process for the class to duplicate. As such, I only used this brand new coating on two sections.
That said, these two sections I corrected and coated were more than enough real-estate for me to use the product and get a feel for it's application characteristic as well as final results.
Here's the Conch27 in the condition it arrived in. To the untrained eye - she looks pretty sweet!
http://www.autogeekonline.net/gallery/data/4245/2021_Boat_Class_0001.JPG
Still looks good from this angle... and there's Yancy getting some video of the before condition.
http://www.autogeekonline.net/gallery/data/4245/2021_Boat_Class_0002.JPG
And from this far shot - most people would think this boat is in good, even great condition.
http://www.autogeekonline.net/gallery/data/4245/2021_Boat_Class_0002c.JPG
But to really get a feel for just how badly the gelcoat on this boat has oxidized - you need the right perspective.
From this close with some light on the side of the hull - do you see it?
http://www.autogeekonline.net/gallery/data/4245/2021_Boat_Class_0003.JPG
This boat is severely oxidized. With some good lighting you can see where the dark blue gelcoat has actually turned white.
http://www.autogeekonline.net/gallery/data/4245/2021_Boat_Class_0004.JPG
Now you can really see the true condition...
http://www.autogeekonline.net/gallery/data/4245/2021_Boat_Class_0005.JPG
Here's the tools, products and pads I'll use for my Test Spot and if it works wonders - this will also be the process the class will use over the entire boat.
http://www.autogeekonline.net/gallery/data/4245/2021_Boat_Class_0007.JPG
And here's the results after removing the oxidation, polishing the gelcoat to a high gloss and then sealing the gelcoat with the NEW Marine 31 Vessel Coat UV Pro
http://www.autogeekonline.net/gallery/data/4245/2021_Boat_Class_0006c.JPG
Day and Night Difference
You can easily see the deep, dark richness of the original factory dark blue color for the Conch27
http://www.autogeekonline.net/gallery/data/4245/2021_Boat_Class_0006.JPG
Video Review
https://youtu.be/lS0hm4jNNxY
Written Review
This new coating is easy to use. And the time to use it is when your boat is brand spanking new. Why? Because when a boat is brand new the gelcoat finish is in perfect condition. There's no hard work to do, simply do a light polishing to ensure the gelcoat surface is absolutely clean and free from any previously applied waxes or even spray detailers, (from the boat dealership or the boat factory), then use the Marine 31 Prep Spray to remove any polishing oils and next - install the Marine 31 Vessel Coat UV Pro.
And here's the good news! This Marine 31 ceramic coating will far outlast any conventional boat wax or sealant. But the time to coat your boat is when it's brand new. If you have an older boat, you can still get the long lasting protection and hydrophobic characteristics from the Marine 31 Vessel Coat UV Pro - BUT... like I did in my Test Spot - you'll have to first perform any gelcoat correction work to remove the oxidation and other surface defects.
Application
The coating itself, like most coatings is a thin, clear liquid, like a fine, highly spun oil. After first priming your applicator pad the coating glides over the surface with ease. There's no stickiness to it and because of the extended flash time or evaporation rate, you have plenty of time to tackle a large section making a crosshatch pattern. While the marketing copy states you can tackle up to a 6' by 6' section at one time with a waiting time of 4-5 minutes (flash time), before you need to start leveling the coating and wiping off the excess, I prefer to work smaller areas, about 2' x 2' just because it's a lot easier to manage a smaller section and do a GREAT job of applying and removing the coating than to tackle a really large size, (and 6' x 6' is a LARGE size), and risk doing less than stellar work. This type of marine detailing project is intense and it's really something you need to get right the first time.
Wipe-off
If you're brand new to marine coatings and even automotive coatings for that matter - in case you didn't know, the wiping off aspect of installing a coating is also part of the installing process.
Say what?
That's right. When you wipe the treated area with a clean, microfiber towel, "yes" you are removing the excess but in the process you're also PUSHING the excess over the surface and this has a LEVELING effect, which ensures uniform coverage over the entire section just coated. The wipe-off aspect is just as important as the installation step because you're creating a uniform layer of protection and also visual perfection. The good news is due to the long flash time, evening out the coating and wiping off any last remaining coating residues is a breeze. And the results? A totally clear, high gloss, slick surface that looks better than new. AND - these results will last far longer than the alternatives to a ceramic boat coating, conventional marine waxes and sealants.
How long will the Marine 31 Vessel Coat UV Pro last?
The company says this coating will easily last up to one year but that's as far as they want to claim because there's too many factors that affect how long ANYTHING lasts in the marine environment. For example a salt water environment is a lot more harsh and corrosive than a fresh water environment. Length of time in the water is also a factor. The coating on a boat that is stored in a Boat Barn or on a lift when not in use will easily last longer than the coating on a boat left in the water 24 hours a day, 7 days a week. A good one year of protection is still much longer than a conventional boat wax or sealant no matter how you look at it. And... if you do remove your boat from the water when not in use and wash her down after each boating trip, you could get up to 2 years of protection before you have to re-apply.
New Boats
If you have a brand new boat - NOW is the time to use Marine 31 Vessel Coat UV Pro - while the boat is still in factory new condition exposure to the water, sun and the elements take their tool and cause oxidation.
Older boats
If you have an older boat that you plan on detailing to bring back the shine, then after all the hard work is done, switch over to a ceramic coating to maximize the results from all your hard work.
Nothing wrong with conventional boat waxes and sealants, they are easier to work with than coatings but the lack the longevity of the Marine 31 Vessel Coat UV Pro. Plus because the Marine 31 Vessel Coat UV Pro last longer and creates a super hydrophobic surface that repels dirt, grime and water - your boat will stay cleaner longer and be much faster and also easier to wash and dry after a day of boating fun.
On Autogeek.com
Marine 31 Vessel Coat UV Pro (https://www.autogeek.net/marine-31-vessel-coat-pro.html)
:)