Scholl Concepts S30 leaving micro marring/ DA Haze

[detailjja]

I’m trying to get this Range Rover done but having issues.

The Scholl Concepts S30 is working amazing for correction and gloss but it’s leaving a haze when looking at certain angles with the inspection light.

It’s a brand new truck and really has no deep scratches so the S30 is perfect for the correction.

I tried all different pad combos and other products.

Scholl S20/30

Rupes Uno pure ultra fine
Rupes new DA fine
Angelwax perfect polish
Sonax PF
MG 215

Tried a lot of product, little bit of product, water.......

I am stumped and don’t want to finish the vehicle like this.

Any advice would be amazing!

Ty

[98CayenneTA]

What pad ?

[detailjja]

What pad ?

Sorry,

LC - blue, white, black
Hex- black
Megs- yellow
Rupes- yellow and white ultra fine

[Billy Baldone]

Try a stiffer cutting pad with Perfect finish almost no pressure

[detailjja]

Try a stiffer cutting pad with Perfect finish almost no pressure

orange?

[Billy Baldone]

Yes. i have finished soft Ford Black with a perfection Artist Coarse blueberry pad

[detailjja]

Yes. i have finished soft Ford Black with a perfection Artist Coarse blueberry pad
It made it probably twice as bad hahahahaha

im gonna lose it lol

literally can’t find a combo

[98CayenneTA]

Don't suppose you have any Buff & Shine Euro Tech white pads do ya?

[detailjja]

Don't suppose you have any Buff & Shine Euro Tech white pads do ya?
No I wish, my next order they’ll be coming.

[Mike Phillips]

Do you have any other products to test?

Or benchmark against?


:)

[detailjja]

Do you have any other products to test?

Or benchmark against?


:)

Hey Mike, yes I also tried this Am

Griots correcting and perfecting

3D one

MG Ultimate

So far the Angelwax on a black pad with 2 sprays of water on speed 1 super fast arm movement and one pass seems to yield the best results. Not perfect.

[fly07sti]

What machine are you using?

[98CayenneTA]

And are you sure you're working the products long enough and hard enough?

[Mike Phillips]

So far the Angelwax on a black pad with 2 sprays of water on speed 1 super fast arm movement and one pass seems to yield the best results.








What machine are you using?




Sounds like a rotary to me.


:dunno:

[Mike Phillips]

Hey Mike, yes I also tried this Am

Griots correcting and perfecting

3D one

MG Ultimate




The Griot's Perfecting Cream is a fine cut polish and uses top notch abrasive technology.

The 3D One and Meguiar's Ultimate Line are also top notch products that use top shelf abrasive technology.


If you're using a rotary - my recommendation is time to get an orbital to compliment your rotary.


:)