Wolfgang Sealant 3.0 vs Sio2 Sealant vs Uber Ceramic Spray Coating

[PeteT19640]

Hi
Which of these in the Wolfgang line deliver the best on all of these?
1. Gloss
2. Durability
3. Beading & sheeting

Anything else that comes to mind?

Thanks in advance

[Mike Phillips]

Hi
Which of these in the Wolfgang line deliver the best on all of these?

1. Gloss
2. Durability
3. Beading & sheeting

Anything else that comes to mind?

Thanks in advance

I'd have to say, Uber Ceramic Spray Coating.



:)

[DUBL0WS6]

Yep, the CSC is a really nice product. It applies so easily unlike other products I've read about. Really reflective glassy look.

[PeteT19640]

Thanks for your replies.
How often do you think it should be reapplied?
What would be a good topper maybe the Sio2 Silica Spray?

[acuRAS82]

Thanks for your replies.
How often do you think it should be reapplied?
What would be a good topper maybe the Sio2 Silica Spray?

You can probably go 6 mo the in normal/mild climate between reapplication, but it’s so easy I would do it every few months for max performance, including two coats to begin with.

I think @DUBLOWS6 has used the WG SiO2 silica spray on top and likes the look a lot.

[DUBL0WS6]

Yep the Wolfgang SIO2 spray adds some wetness.

[PeteT19640]

Thanks for your replies.
What is the best result way to apply considering I applying by hand?
Apply 2 coats I know is for the best result.
Still 2-3 sprays per panel?
I bought the first roll of special and initially wasn't terribly impressed, but now it has been more used wondering what best way to use?

Appreciate your help.

[DUBL0WS6]

I think it works better to spray the SIO2 spray onto a slightly damp towel and wipe it on and buff it off.

[PeteT19640]

Thanks for your reply.
What about a microfiber applicator?
When you say wet cloth you mean primed?
How long to let it dry before buffing?

Thanks in advance

[DUBL0WS6]

Just a light spritz of water and then a light mist of SIO2 spray. I like a suede MF towel for applying.

[PeteT19640]

Thanks
As this product has been out for a little while now no changes to application etc.
The Silica sio2 spray would give it bit more durability?
I'm wondering if I did the uber waterless wash ratio with some sio2 Silica. I do a blend of uber waterless wash with spritz Sealant spray currently and works well?

[Mike Phillips]

Thanks
As this product has been out for a little while now no changes to application etc.
The Silica sio2 spray would give it bit more durability?



I would think so. That and normal regular washing and drying to keep the coating clean from contaminants.





I'm wondering if I did the uber waterless wash ratio with some sio2 Silica.

I do a blend of uber waterless wash with spritz Sealant spray currently and works well?



Do you mean, MIX products, as in, spray or pour some of the spritz sealant into the Uber waterless wash?

I guess I'm not completely following what you want to do?

I would say normally, I'm not a fan of the idea of mixing products to try to create a new product. I think there's actually to something when it comes to chemists and chemistry.



:)