Justin at Final Inspection
09-07-2020, 08:33 PM
So this is going to be a pic heavy thread. Lets start back at the beginning of August. I had bartered for a 3pc spoiler for my 2006 GTO with a buddy. It needed some work and a repaint but I'm more than willing to handle it myself.
So I got to work. Fixed some issues and got it in primer.
https://i.imgur.com/SmVm90f.jpg
https://i.imgur.com/gBUMAXo.jpg
Once in primer I blocked with 320 wet and 600 wet. Then sprayed with Martin Senour base and Finish 1 740 High Solids clear. Once cured it was damped sanded with Mirka Abralon disks and polished out.
https://i.imgur.com/vhVhu7f.jpg
https://i.imgur.com/L75r7HL.jpg
Then I mounted it and enjoyed the results
https://i.imgur.com/Mdzgvbw.jpg
https://i.imgur.com/cNV8gig.jpg
Here's where I went off my rocker. I decided to just disassemble the car and do a full repaint lol. Overall the car was very straight but with 165k miles it had road rash and thin spots starting to show in the clear.
https://i.imgur.com/xdSCHmY.jpg
https://i.imgur.com/DR6L9Vm.jpg
Then I had the glass pulled so I wouldn't have tape lines around the windows. Also took care of some minor issues with sanding with 320 and 600. Also some 2k urethane filler primer in spots.
https://i.imgur.com/ja8breL.jpg
https://i.imgur.com/8NZRxiO.jpg
Once the main body was sanded with 320 and 600 wet I focused my attention to the bumpers and side skirts. The front bumper needed a bunch of sanding and flexible filler for the deeper scrapes underneath.
https://i.imgur.com/4Jlq6HP.jpg
https://i.imgur.com/1s18W3n.jpg
Then sprayed with 2k urethane filler primer and wetsanded with 320 and 600
https://i.imgur.com/vt2T0tU.jpg
https://i.imgur.com/BTtu9Il.jpg
https://i.imgur.com/Ysuf5V6.jpg
https://i.imgur.com/ahsVRC3.jpg
Then I started on the hood.
https://i.imgur.com/zYaiYpV.jpg
I refinished and painted the underside too
https://i.imgur.com/ZvRhfg0.jpg
Rear bumper painted
https://i.imgur.com/qc805Bv.jpg
https://i.imgur.com/Z0CO192.jpg
Up until here things were going pretty well. Then on the last little section of sanding and polishing the rear bumper I burned it. Just shows ya anything can happen.
This is after feathering out the repair area.
https://i.imgur.com/5X5B9jL.jpg
Luckily I only needed to dust some color on it after sanding and reclear the top section as there was a nice body line to break up.
Then I realized that the lower valance for the rear bumper was tattered and needed repainting.
https://i.imgur.com/8ZZx5Rb.jpg
https://i.imgur.com/4PnLYPd.jpg
https://i.imgur.com/fIQ34WW.jpg
After
https://i.imgur.com/o72qKWN.jpg
https://i.imgur.com/8olrI5e.jpg
https://i.imgur.com/qiNP5zN.jpg
So I got to work. Fixed some issues and got it in primer.
https://i.imgur.com/SmVm90f.jpg
https://i.imgur.com/gBUMAXo.jpg
Once in primer I blocked with 320 wet and 600 wet. Then sprayed with Martin Senour base and Finish 1 740 High Solids clear. Once cured it was damped sanded with Mirka Abralon disks and polished out.
https://i.imgur.com/vhVhu7f.jpg
https://i.imgur.com/L75r7HL.jpg
Then I mounted it and enjoyed the results
https://i.imgur.com/Mdzgvbw.jpg
https://i.imgur.com/cNV8gig.jpg
Here's where I went off my rocker. I decided to just disassemble the car and do a full repaint lol. Overall the car was very straight but with 165k miles it had road rash and thin spots starting to show in the clear.
https://i.imgur.com/xdSCHmY.jpg
https://i.imgur.com/DR6L9Vm.jpg
Then I had the glass pulled so I wouldn't have tape lines around the windows. Also took care of some minor issues with sanding with 320 and 600. Also some 2k urethane filler primer in spots.
https://i.imgur.com/ja8breL.jpg
https://i.imgur.com/8NZRxiO.jpg
Once the main body was sanded with 320 and 600 wet I focused my attention to the bumpers and side skirts. The front bumper needed a bunch of sanding and flexible filler for the deeper scrapes underneath.
https://i.imgur.com/4Jlq6HP.jpg
https://i.imgur.com/1s18W3n.jpg
Then sprayed with 2k urethane filler primer and wetsanded with 320 and 600
https://i.imgur.com/vt2T0tU.jpg
https://i.imgur.com/BTtu9Il.jpg
https://i.imgur.com/Ysuf5V6.jpg
https://i.imgur.com/ahsVRC3.jpg
Then I started on the hood.
https://i.imgur.com/zYaiYpV.jpg
I refinished and painted the underside too
https://i.imgur.com/ZvRhfg0.jpg
Rear bumper painted
https://i.imgur.com/qc805Bv.jpg
https://i.imgur.com/Z0CO192.jpg
Up until here things were going pretty well. Then on the last little section of sanding and polishing the rear bumper I burned it. Just shows ya anything can happen.
This is after feathering out the repair area.
https://i.imgur.com/5X5B9jL.jpg
Luckily I only needed to dust some color on it after sanding and reclear the top section as there was a nice body line to break up.
Then I realized that the lower valance for the rear bumper was tattered and needed repainting.
https://i.imgur.com/8ZZx5Rb.jpg
https://i.imgur.com/4PnLYPd.jpg
https://i.imgur.com/fIQ34WW.jpg
After
https://i.imgur.com/o72qKWN.jpg
https://i.imgur.com/8olrI5e.jpg
https://i.imgur.com/qiNP5zN.jpg