TMQ
08-11-2020, 07:38 PM
Worked on this Accord, right next to the AMC Javelin.
Car was left outside for few years under trees. The dirt was thick and hard like a varnish.
1. Iron-X'ed the paint---The varnish like dirt didn't allow the iron-x to reach the paint!
2. Took 4 buckets to just wash the darn thing!
3. Then redid iron-x. Worked.
4. Washed one more time.
5. Soapy water/Clay towel. Clayed the car.
6. Rinse and Dried.
7. Deep cleaned door jams and hood/trunk channels.
This took approx 4 hours just in the wash!
1. Pull inside and did test.
2. BlackFire One step/Rupes yellow pad and CBeast. Meh....dull haze like surface was still there.
3. 3D Speed and McKee's Redline polish pad and CBeast. Bingo---It actually cut the surface haze.
Thanks to CBeast and forced rotation, Was able to get this done in 3 hours! Record for me!
Total: 7 hours.
Onto pictures.
Car was left outside for few years under trees. The dirt was thick and hard like a varnish.
1. Iron-X'ed the paint---The varnish like dirt didn't allow the iron-x to reach the paint!
2. Took 4 buckets to just wash the darn thing!
3. Then redid iron-x. Worked.
4. Washed one more time.
5. Soapy water/Clay towel. Clayed the car.
6. Rinse and Dried.
7. Deep cleaned door jams and hood/trunk channels.
This took approx 4 hours just in the wash!
1. Pull inside and did test.
2. BlackFire One step/Rupes yellow pad and CBeast. Meh....dull haze like surface was still there.
3. 3D Speed and McKee's Redline polish pad and CBeast. Bingo---It actually cut the surface haze.
Thanks to CBeast and forced rotation, Was able to get this done in 3 hours! Record for me!
Total: 7 hours.
Onto pictures.