First wash after SIO2 application - Reset or something else?

[briarpatch]

So....recently applied Wolfgang SIO2 Sealant to my truck....which I'm really happy with, and I'll be giving it the first maintenance wash this weekend. I currently have Reset and P&S Pearl on the shelf. I know if seems like a stupid question, but is Reset too strong for the first maintenance wash, or doesn't it matter?

[WillSports3]

Reset is perfectly fine for anything basically. As long as you watch the dilution ratios, you should be fine.

[TTQ B4U]

All I use is Reset. 1oz makes 5 gals of wonderful wash.

[The Guz]

Pearl would be just fine.

[acuRAS82]

Reset is perfectly fine for anything basically. As long as you watch the dilution ratios, you should be fine.

By watching dilution ratios, is sticking to 1:500 pretty safe for all LSPs?

[WillSports3]

Ya, I stick to the one ounce for the 5 gallon water. Mind you, I'm more looosey goosey with the dilution ratio because I use a coating.

[acuRAS82]

Ya, I stick to the one ounce for the 5 gallon water. Mind you, I'm more looosey goosey with the dilution ratio because I use a coating.

Understood. I’ll be extra precise across the board, especially when washing non-coatings.

[WillSports3]

Ya, depends on the LSP and all the chemical particulars part of the LSP, something that people far more qualified than me can comment on.