Just wanted to tune in...

[ShimShimHada]

Awesome shipping speed, I got my 6.5" pads and 6" backing plate (and some other stuff) really fast!

I have a question though, in the little outline sheet that came with the package, you guys stated that I would need 7.5" pads for a 6" backing plate, but if I prefer the 6.5" pads, I should be fine as long as I'm wary about the edges, right? Thanks a lot, guys.

[BILL]

Awesome shipping speed, I got my 6.5" pads and 6" backing plate (and some other stuff) really fast!

I have a question though, in the little outline sheet that came with the package, you guys stated that I would need 7.5" pads for a 6" backing plate, but if I prefer the 6.5" pads, I should be fine as long as I'm wary about the edges, right? Thanks a lot, guys.


Actually for the 6.5 pad they recommend the 5 "plate, but you could use the 6.5 with the 6 plate......just be careful of the edges.......maybe down the road you'll pick up the 5" plate:)

[Jonboy]

Really close with a 6" plate so make sure the pads goes on square and watch those edges

[ShimShimHada]

Actually for the 6.5 pad they recommend the 5 "plate, but you could use the 6.5 with the 6 plate......just be careful of the edges.......maybe down the road you'll pick up the 5" plate:)
Yeah, that would be easier than changing all my pads. Does autogeek do easy exchanges?

[ShimShimHada]

Really close with a 6" plate so make sure the pads goes on square and watch those edges
I'll practice on the family beater, so I get the placement down. :D

[BILL]

Yeah, that would be easier than changing all my pads. Does autogeek do easy exchanges?


call them............im sure........:)

[ShimShimHada]

call them............im sure........:)
I've decided to just keep the 6" backing plate, since I have a 7336 with a 6" counter-weight. I will definitely order the 5" BP with my next order from Autogeek though!

[dengood1]

Autogeek is all about 100% customer satisfaction.....

[Meghan]

Yeah, that would be easier than changing all my pads. Does autogeek do easy exchanges?
OHH COURSE WE DO!!! LOL :p If you need to exchange just call my ext and I will take care of you. If you do decide to use the 6" backing plate with the 6.5" pads, please becareful, and always try first on someone else's car. J/K:D

[ShimShimHada]

OHH COURSE WE DO!!! LOL :p If you need to exchange just call my ext and I will take care of you. If you do decide to use the 6" backing plate with the 6.5" pads, please becareful, and always try first on someone else's car. J/K:D
That's good to know. lol

I already opened the bag for backing plate though, how would an exchange happen (shipping fees, etc.)?

[Meghan]

That's good to know. lol

I already opened the bag for backing plate though, how would an exchange happen (shipping fees, etc.)?
As long as its in new shape we will take it back, call and I will give you return instructions if you want to return it. Call our number and hit my ext. #207 anytime after 730 am. If you call that early bring coffee!!!;)

[ShimShimHada]

As long as its in new shape we will take it back, call and I will give you return instructions if you want to return it. Call our number and hit my ext. #207 anytime after 730 am. If you call that early bring coffee!!!;)
Nice, it's the 1800 number on the autogeek front page, right?

[Meghan]

1-800-869-3011

[ShimShimHada]

1-800-869-3011
Thanks, how do I rate you guys on the Yahoo thing? You guys are awesome. :cheers:

[dengood1]

As long as its in new shape we will take it back, call and I will give you return instructions if you want to return it. Call our number and hit my ext. #207 anytime after 730 am. If you call that early bring coffee!!!;)

Is Columbian ok;) Is it normal for the backing plate to start "separating" or coming apart where it starts at an angle on the sides after only a month? I wouldn't think I would have to replace it, definitely not yet anyhow. I've only done 5-6 vehicles with it so far. Thoughts? Meghan?