Swirls are back : (

[pampos]

I am desperate http://www.detailingworld.co.uk/forum/images/smilies/wall.gif .After of lot of tries to remove all the swirls,haze marring etc and give the shine back to my car,after applying the sealants glazes wax etc to protect it and give to it more shine,today after washing it some swirls are back again http://www.detailingworld.co.uk/forum/images/smilies/frown.gif .This Honda paint is not very soft but EXTREMELY SOFT and the car is black.I used the 2 bucket method and a lampswool wash mitt,microfiber towel for drying and after the third wash(that it was today,i finished the detail about 3 weeks ago) some swirls are back.Is there something that i can use to remove them or at least hide them(because i will remove the clear coat if i polish it every 3 weeks),without removing the sealant?(it took me 3 days for a complete application,1 coat every 12 hours).I will do anything to remove them even polish it every week if there was no possibility to remove the clear coat.All possible solutions are welcome....

[mixxer]

fOAM GUN !

[YankeeFan]

I have a Honda too and have a million spider swirls that I intend to Flex out this Summer.

After reading all the posts this Winter I intend to do the following:
prewash with a foam gun, rinse off. Then, using a combination of the gun and the 2 bucket system, I will wash one section at a time. I will then air dry majority of the car with a leaf blower. Finally, wipe off the rest of the water with a Guzzler and some QDer sprayed onto the MF.

I'm hoping this will work, its the best combination of things to do I heard about.

Howard