The Hobbits are out, the PiXiEs are IN!!!

[Aaryn NZ]

Hello my friends. :xyxthumbs:

So it’s been the best part of a Month since we returned from our vacation in the USA, & that means I’ve spent the best part of that time putting some hours in at the shop with the latest additions to my Flex family - the Flex PXE 80 12-EC & the Flex XCE 8-125 18.0 Cordless Polishers. :buffing:

My collection of Flex tools now consists of the four cordless variations & each one has its valued time & place inside our shop.

https://uploads.tapatalk-cdn.com/20200210/fe1701f59815e91b90cd4a0149f5cb5e.jpg

Without going into the technical ins & outs of the PXE 80 12-EC I’m just going to talk about my experiences to date with this tool in hand in a “real World” situation - our little shop.

When Flex released the information about the PiXiE I already knew I had to have one, & having one in hand it exceeded all expectations almost immediately & I hadn’t even turned it on yet.
It’s a lot smaller than the pictures depict & Wow, it’s so light & beautifully balanced.
The quick release mechanism is incredibly easy to use & most importantly it’s fast! No need for tools to change configurations or backing plate/pad size. Fast & convenient - we’re winning already. :props:

I’m gonna pause it here & add some pictures in case anyone gets bored ...


Here I am using the PiXiE to restore some clarity back into the clear vinyl window on this Mazda MX-5 (Miata) ... Yellow RUPES pad & 3D ONE.

https://uploads.tapatalk-cdn.com/20200210/d947fe7bd8c3a2a33e5cef78d4e8e544.jpg

https://uploads.tapatalk-cdn.com/20200210/50754a8e4c12dcbad7540874ce82c10e.jpg

https://uploads.tapatalk-cdn.com/20200210/fb78826acfeaf0e25b8f3c4b389569d3.jpg


Ignition time! Turning the PiXiE on & as I expected I was greeted with that typical Flex smoothness & then there was an awesome display of power from this pint size powerhouse! Even though I had read about the power of this machine before, I dont think I was really prepared for the actual performance it possesses.
Running the PXE in 12mm free spinning DA mode with a three inch pad it not only surprised me, it blew my mind. Wow this thing has some muscles! :dblthumb2:


https://uploads.tapatalk-cdn.com/20200210/3a8d2904d7565fbaaa3a087dae318096.jpg

https://uploads.tapatalk-cdn.com/20200210/c12836feb4ef572d3e1181caf60b76ae.jpg

https://uploads.tapatalk-cdn.com/20200210/066efa6c21aeb7b245f95cc8544fbb1a.jpg


I attempted to stop the pad from spinning simply in “real World” situations but I just couldn’t. In fact, I think it’d be pretty careless to try on purpose to get it to actually stop so I figured I would conclude that the PXE 80 12-EC has ample amounts of power to tackle any situation I am going to throw at it in our shop.

Switching over to a one inch pad in 12mm free spinning DA mode - without the need of any tools too I must say, & again, the PiXiE runs as smooth, powerful & as well balanced as ever ... colour me impressed.

I guess if there was a gripe, & I’m not entirely sure there is as this machines attributes put a shine on every situation but perhaps an excellent addition would be a two inch backing plate ... for use in either DA or Rotary mode ...

Speaking of Rotary mode - So, the PiXiE is set up for use as a one inch Rotary, the three inch backing plate cannot be used in Rotary configuration although I believe ( & I’ve read this opinion from others too) it certainly has the power to spin a three inch pad.

Using the PiXiE in one inch Rotary mode rewards you with the same pleasurable experience as with the one & three inch DA configurations. Smooth, balanced & power for days.


https://uploads.tapatalk-cdn.com/20200210/b08911a011096dba128f174868c075ae.jpg

https://uploads.tapatalk-cdn.com/20200210/6071e9246f36a94848d2674ee28cefa2.jpg

https://uploads.tapatalk-cdn.com/20200210/4e1bd3201518f7b75287793069a61e87.jpg

https://uploads.tapatalk-cdn.com/20200210/a8ee2af3dd6fcdcf59965958d3d92bfa.jpg


My verdict - Well, I believe I may have a “Tool Crush” on the PXE 80 12-EC, it really is a massive performer. I haven’t had a car through the shop that hasn’t had the PiXiE touch & I believe myself, the cars & my clients are the better for it. It really is a brilliant machine that does exactly what it’s supposed to do & does it extremely well. :props:

Thank you all for stopping by & reading my thoughts on the PiXiE (PXE 80 12-EC) ...

... Oh, & for what it’s worth - the 3mm free spinning DA configuration - sanding only in my opinion - works a treat.


A couple of pictures of the cars the PiXiE has been put to work on ...

https://uploads.tapatalk-cdn.com/20200210/3b5372faeac322a1882cbf3609f8ba7c.jpg

https://uploads.tapatalk-cdn.com/20200210/4a18fe5fd1347d20ddf9258106e289ec.jpg

https://uploads.tapatalk-cdn.com/20200210/00245eb61bc400f0ff8bbb64ac6fa679.jpg

https://uploads.tapatalk-cdn.com/20200210/8a12ad824aa7d96dec2e64fa6023fc68.jpg

https://uploads.tapatalk-cdn.com/20200210/ee8b3c20ec69a720fa2c85c531ba8cb9.jpg

https://uploads.tapatalk-cdn.com/20200210/b75fa7d8b3e92aa1882734d204941eb1.jpg

https://uploads.tapatalk-cdn.com/20200210/33a9fb00ab50b1f36865f233a458834d.jpg

https://uploads.tapatalk-cdn.com/20200210/58d33a2599f42fadad6945202ce2a31d.jpg

https://uploads.tapatalk-cdn.com/20200210/9e2d2248f2e5c062a8c6fce21191e187.jpg



Aaryn NZ. :dblthumb2:


Sent from my iPad using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

[Dr Oldz]

Very nice. I love this little tool. I have it about 3 months now and I wonder how I did without this tool now.

Worth every penny!

[Mike@DedicatedPerfection]

Very cool Aaryn! Nice collection of FLEX. Bit jealous over here. I need to get one as well.

Keep up the outstanding work buddy.

[PaulMys]

Aaryn tearing it up with the Pixie!!

Awesome work as always, my brother. :)

Love seeing all those "Down Under" rides.

[Sizzle Chest]

Thanks for the review and pics Aaryn...now you're gonna make me purchase another machine!

[JustJesus]

Thanks, bud! Nice "review" of this wonderful little guy. I'm not sure I want it more, though. I mean, I was already at MAX WANT mode. Now I'm just pegging the needle in the red. haha

That clear vinyl window came out...clear!

Excellent work on all those cars!!!

[PaulMys]

Thanks, bud! Nice "review" of this wonderful little guy. I'm not sure I want it more, though. I mean, I was already at MAX WANT mode. Now I'm just pegging the needle in the red. haha

That clear vinyl window came out...clear!

Excellent work on all those cars!!!

If I were to detail other's cars for money, this machine would be a must IMO.

But for little ol' me maintaining and babying my Ram and wife's Jeep, the cost of the Pixie wouldn't make sense.

That doesn't detract from the cool factor of this machine though..... I almost wish I needed one. Lol

[JustJesus]

If I were to detail other's cars for money, this machine would be a must IMO.

But for little ol' me maintaining and babying my Ram and wife's Jeep, the cost of the Pixie wouldn't make sense.

That doesn't detract from the cool factor of this machine though..... I almost wish I needed one. LolTotally agree. If I did it daily, I would.

But, I only do limited work. So, it will have to wait.

I'm considering selling off a machine or two, though!! That could help :)

Sent from my SM-N960U using Tapatalk

[Detailchick]

I really want this, I need a small polisher, im in between this and the ibrid.. I loved my xc3401 but it got stolen and now i only have a rupes LHR15 and makita .Im considering going all Flex or all Rupes. I like Flex more but I see alot of people with Rupes.


Sent from my iPhone using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

[Aaryn NZ]

Very nice. I love this little tool. I have it about 3 months now and I wonder how I did without this tool now.

Worth every penny!

Thanks Dr Oldz. :xyxthumbs:

Indeed buddy, I have been thinking the same ...



Very cool Aaryn! Nice collection of FLEX. Bit jealous over here. I need to get one as well.

Keep up the outstanding work buddy.

Thank you Mike. :xyxthumbs:

Yeah you do my friend. I know you’re gonna love having a PXE in the cavalry.



Aaryn tearing it up with the Pixie!!

Awesome work as always, my brother. :)

Love seeing all those "Down Under" rides.

Cheers PaulMys. :xyxthumbs:

Mate, I’m struggling to put this thing down. :buffing:

Appreciate it Paul. :xyxthumbs:



Thanks for the review and pics Aaryn...now you're gonna make me purchase another machine!

Thank you Scott. :xyxthumbs:

Hahaha, all part of my plan ... PiXiE’s for everyone!!!:buffing:


Aaryn NZ. :dblthumb2:

[Aaryn NZ]

Thanks, bud! Nice "review" of this wonderful little guy. I'm not sure I want it more, though. I mean, I was already at MAX WANT mode. Now I'm just pegging the needle in the red. haha

That clear vinyl window came out...clear!

Excellent work on all those cars!!!

Thank you JustJesus! :xyxthumbs:

Appreciate it my friend. Awh man, imagine all those tight spots on them red Honda’s you can turn to gold ... :buffing:



If I were to detail other's cars for money, this machine would be a must IMO.

But for little ol' me maintaining and babying my Ram and wife's Jeep, the cost of the Pixie wouldn't make sense.

That doesn't detract from the cool factor of this machine though..... I almost wish I needed one. Lol

Paul buddy, look at it this way - Buy another Car or two & then it would be perfectly suited ... :buffing:

Just say’n ..


I really want this, I need a small polisher, im in between this and the ibrid.. I loved my xc3401 but it got stolen and now i only have a rupes LHR15 and makita .Im considering going all Flex or all Rupes. I like Flex more but I see alot of people with Rupes.


Sent from my iPhone using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)


Thank you Detailchick. :xyxthumbs:

Wow, someone stole your 3401!!! That sucks! Sorry to hear.

Personally - I have had the RUPES Bigfoot Nano iBrid pretty much since it was released & I would imagine by the end of two Months with this Flex PXE 80 I will have used this more than I have the RUPES in all the years I’ve had it.

Without wanting to spark a RUPES v Flex war - the Flex is everything the RUPES wishes it could be & better.

As for which way to go - All RUPES or all Flex I think that’s a “use what works for you” situation. :buffing:


Aaryn NZ. :dblthumb2:

[JustJesus]

I loved my xc3401 but it got stolen and now i only have a rupes LHR15 and makita... I like Flex more but I see alot of people with Rupes.

Nothing wrong with Rupes, but don't go there just because others do! If you like Flex more, stick with Flex. :)
Sorry to hear about your 3401 :( I'd be [extremely upset]


Thank you JustJesus! :xyxthumbs:

Appreciate it my friend. Awh man, imagine all those tight spots on them red Honda’s you can turn to gold ... :buffing:

Anytime, Aaryn!

It should make it a bit easier on those red Hondas (the dude had FIVE hatchbacks last I was there!). Don't know about turning to gold, though. haha... He only wants a quick enhancement, before he sells them off.

I'm going to talk to a co-worker into buying my PC. I'll get around to posting the GG3 and PE8 in the next week or two. Hopefully, that helps! :)

[WaxMaster1]

Hahaha, all part of my plan ... PiXiE’s for everyone!!!:buffing:


Aaryn NZ. :dblthumb2:

Sweet!! You buyin'? I'll message you my address.

[Mike Phillips]

Hello my friends. :xyxthumbs:

So it’s been the best part of a Month since we returned from our vacation in the USA, & that means I’ve spent the best part of that time putting some hours in at the shop with the latest additions to my Flex family - the Flex PXE 80 12-EC & the Flex XCE 8-125 18.0 Cordless Polishers. :buffing:





Thanks for the update and sharing Aaryn, good to hear you and the family made it home safe and sound.

I'll share the link to this thread with my friends at FLEX.






My collection of Flex tools now consists of the four cordless variations & each one has its valued time & place inside our shop.

https://uploads.tapatalk-cdn.com/20200210/fe1701f59815e91b90cd4a0149f5cb5e.jpg




Nice picture!


Everyone loved the FLEX PiXiE in the boat class but to be fair, everyone also loved the RUPES Nano too!

Pictures: 2020 Boat Detailing Class - SOLD OUT! (https://www.autogeekonline.net/forum/pictures-2-day-boat-detailing-classes/125511-pictures-2020-boat-detailing-class-sold-out.html)



:dblthumb2:

[Kamakaz1961]

Keep on rocking!