View Full Version : FK1000p over BF one step?
BTLew81
10-22-2019, 01:31 PM
Anyone tried this combo? Just curious about using my two favorite products in conjunction with each other.
thanks.
Bobby B.
10-22-2019, 02:40 PM
I never tried that combo, but those are both excellent products and see no issues with topping the Blackfire One Step with the Finish Kare Hi-Temp Paste Wax. I say give it a try and post a review.
BLACKFIRE One Step 16 oz. (https://www.autogeek.net/blackfire-one-step-16.html)
Finish Kare 1000P Hi-Temp Paste Wax, high melt polymer car wax, Finish care auto wax (https://www.autogeek.net/finish-kare-1000p-wax.html)
FUNX650
10-22-2019, 02:44 PM
Just curious about using my two favorite
products in conjunction with each other.
•The only credible prerequisite is, IMO:
-If the Sealant part of the BlackFire AIO has
the same “Wet Diamond Polymers” as those
found in BLACKFIRE’s Paint Sealant, then I’d
give the AIO a cure time of ~8 hrs. before
actually applying the FK1000P.
And:
Since FK1000P is a Finishing Sealant
(has no abrasives): I don’t see why not.
Full Steam Ahead. :xyxthumbs:
Bob
acuRAS82
10-22-2019, 08:06 PM
•The only credible prerequisite is, IMO:
-If the Sealant part of the BlackFire AIO has
the same “Wet Diamond Polymers” as those
found in BLACKFIRE’s Paint Sealant, then I’d
give the AIO a cure time of ~8 hrs. before
actually applying the FK1000P.
And:
Since FK1000P is a Finishing Sealant
(has no abrasives): I don’t see why not.
Full Steam Ahead. :xyxthumbs:
Bob
I’ve always been confused/uneducated as to whether true sealants (wipe on, buff off) play together well. I’m glad to see the support for this combo by our experienced members. I really hope it works and in general, hope most sealants are able to play together (assuming finishing sealant always on top of course).
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.