PDA

View Full Version : Cure Time


Pages : [1] 2
Darren F
07-14-2006, 08:26 AM
Do I need to wait between coats of Prime Acrylic and Acrylic Jett?
scooterguitar
07-14-2006, 01:52 PM
I don't think AG sells those products.
Meghan
07-14-2006, 01:53 PM
Do I need to wait between coats of Prime Acrylic and Acrylic Jett?
No we dont sell them and I am not familiar with them at all.
Jonboy
07-14-2006, 05:32 PM
Darren are you tslking about Werkstatt at all, if so then no your Prime is the prep and the Jet is finish
Neothin
07-14-2006, 08:49 PM
^exactly. Think of prime acrylic as a klasse AIO with a SLIGHTLY stronger sealant left behind. The sealant really isn't worth anything and breaks away in a week or two anyways, so i'd just pretend it wasn't there and top w/ AJ immediately.
3Dog
07-14-2006, 09:19 PM
^exactly. Think of prime acrylic as a klasse AIO with a SLIGHTLY stronger sealant left behind. The sealant really isn't worth anything and breaks away in a week or two anyways, so i'd just pretend it wasn't there and top w/ AJ immediately.
????? Prime Acrylic goes away in a week or two? Its what we now use for chrome. We have had six weeks on bikes that we know about.
ScottB
07-14-2006, 09:51 PM
3Dog .... I agree with you completely. There is more life in prime alone than most want to offer. It can really stand on its own and surpass a carnuaba cleaner wax in terms of durability. Easily a month or more ...
Neothin
07-14-2006, 09:57 PM
I guess my sample was retarded then. I did my bikes farings with it and the beading stopped after 2 washes.
Darren F
07-15-2006, 09:09 AM
Can I put the Prime over a fresh coat of FK1-425 or do i need to wash the car first?
ScottB
07-15-2006, 04:09 PM
Can I put the Prime over a fresh coat of FK1-425 or do i need to wash the car first?


Prime will remove it without issue, that said, with black cars, if you have been outside for more than 2 minutes, you will likely need to rewash. Even one grit of sand "can" reak havoc on the paint.
Darren F
07-15-2006, 04:22 PM
car has actually been sitting in my garage so I think I should be ok.
Darren F
07-15-2006, 04:23 PM
if the car has been outside but I go over it with some QD first is it ok to put the Prime on ?
ScottB
07-15-2006, 04:35 PM
your just looking for scratches and swirls. With Black you must ... must carefully do everything. Consider it mirror, ready to show the world everytime you shortcut. Do it right now... or re-do it later.
Jonboy
07-15-2006, 06:11 PM
Help us out guys whats FK1-425 please?
ScottB
07-15-2006, 06:19 PM
Help us out guys whats FK1-425 please?

Finish Kare 425 -- a poly (water) based qd'er with anti-static abilities, UV protection, and some polymer protection. Unfortunately AG does not carry the line, believed to only be sold direct to date.