Carbon brush replacement guide

[Mgavin1985]

I was trying to search for this but couldn’t find I’m looking for information if it doesn’t exist maybe one can be created

[Mgavin1985]

Let me clarify looking for place to get them one of the polishers I use will need a set and to buy from manufacturers it 30 when shipping is added which is crazy to me and I don’t trust the cheap Chinese one.

Also how long do u go before replacing on your machines *brushes* 1 year 2 years

[howardm4]

it'd be helpful to know what brand/model polisher you have.

?? why would you *replace* the machine every year (or 2 or 3 or ???) especially if you buy a decent one to begin with vs.
some piece of junk?

[rlmccarty2000]

Replace them when the polisher quits. Everything depends on the amount of use the polisher gets.

[Mgavin1985]

Machine was bought used 21mm shurhold it a popular machine in boating community.Shurhold makes products for boat gel coat correction. The machine is most powerful 21mm I have used. to bog it down real effort and pressure is needed. Good build quality low heat at constant use at speed 4.5 I have used for year about 25 corrections or 1 steps maybe 120 hours on it but do not know history I am replacing brushes because I like the machine I treat it well. I replaced grease with mobile 1syn red, clean internals once every 1 month with duster can and slime

[PaulMys]

For as easy to change, and as cheap as they are, I would replace the brushes in any power tool that has them at around 100 hours.

Just my opinion, but I have been using just about every power tool imaginable for 40 years now.

[Mgavin1985]

it'd be helpful to know what brand/model polisher you have.

?? why would you *replace* the machine every year (or 2 or 3 or ???) especially if you buy a decent one to begin with vs.
some piece of junk?

I edited in *brushes* I’m not replacing machine trying to keep machine I am notorious from crappy broken English when using phone. Pm me if you know website going to talk to buff daddy they probably have them
Maybe PBMG can get em

[Mgavin1985]

@Paulmys

Copy That