Under hood protectant for dusty conditions

[chinee]

So I did a 303 wipe down under the hood this weekend and thought, what if I lived where it was dry and dusty, wouldn’t dust just adhere to the 303, no matter how sparingly applied?

So, in such a situation, would I be better leaving the surfaces under the hood bare, or is there something else that works in these conditions?



Sent from my iPhone using Tapatalk

[Bill D]

I routinely dust my engine compartment with a Swiffer duster. Gets in all the nooks and crannies. Works great!

[Rsurfer]

I routinely dust my engine compartment with a Swiffer duster. Gets in all the nooks and crannies. Works great!:urtheman::urtheman:

[Dr Oldz]

Use this. It dries to the touch and won’t collect dust. Then a simple rinse or dusting will maintain it!

Sonus Trim & Motor Kote, acrylic protectant, black plastic protectant, engine dressing (https://www.autogeek.net/sonus-trim-motor-kote.html)

[PA DETAILER]

:iagree:

Just did another engine detail on my truck this weekend. Turns out perfect every time with SONUS.

[SixZee]

Use this. It dries to the touch and won’t collect dust. Then a simple rinse or dusting will maintain it!

Sonus Trim & Motor Kote, acrylic protectant, black plastic protectant, engine dressing (https://www.autogeek.net/sonus-trim-motor-kote.html)

I assume you first wash and dry the engine before you apply Sonus?

[PA DETAILER]

Yes. Then lightly spray 2 coats 10-15 apart. DO NOT TOUCH OR WIPE!

https://www.autogeekonline.net/forum/auto-detailing-101-a/93004-what-can-sonus-motor-kote-do-you.html?highlight=what+can+sonus+motor+kote+do+fo r+you