flooramatic
07-31-2019, 11:39 PM
Has anyone used a Nextractor? The vacuum hose connects onto most shop vacuums like Ridgid, Craftsman, Shop-Vac & others with 2½" diameter vac inlet
67506
Fits all wet / dry vacuums with a 2-1/4" tank opening.
Kit includes:
1: 15' x 1-1/2" Heavy Duty Spiral Hose
1: Stainless Steel Upholstery Tool with 3" head with 1-1/2" OD
1: 25' x 1/4" ID rubber water hose: 15' is inside the vacuum hose and approx. 10' extends from the end of the hose
2: Swivel cuffs with openings for internal water hose
1: 3/4" Brass swivel connector with rubber gasket (screws onto water spigots, garden hoses, water heaters and slop sinks)
How it works:
Plug the vacuum hose adapter into your 2-1/4" vacuum opening.
Screw the brass water hose fitting onto your water source.
Pull the handle on the upholstery tool and it sprays just like an extractor!
For best results, use a hot water source.
Benefits of the Nextractor:
Eliminates repairing costly extractor parts, such as: motors, heating elements, tanks and electronics.
Allows you to use your current vacuum as an extractor and a vacuum.
Nextractor is heavy duty, lightweight, flexible and has a low profile tool design for ease of use!
*Please Note: this hose is designed to be used with low pressure water systems (40-80 lbs) and should not be retrofitted to high pressure machines
How can shampoo be dispensed thru the water hose if its only 1 water hose & no shampoo tube? The only thing I know is it connects onto water heater; buth its length is a bit short from vacuum hose end (25 ft?)
Can the upholstery nozzle be changed or is it glued onto the vacuum hose cuff?
Is the nextractor worth the $ or should i stick to the shop-vac steam team? The shop-vac steam team is several yrs old (1980s/90s?) & parts for the steam team are most likely discontinued
shop-vac steam team in upholstery/small area shampooing mode connected onto Ridgid vac
67507
67506
Fits all wet / dry vacuums with a 2-1/4" tank opening.
Kit includes:
1: 15' x 1-1/2" Heavy Duty Spiral Hose
1: Stainless Steel Upholstery Tool with 3" head with 1-1/2" OD
1: 25' x 1/4" ID rubber water hose: 15' is inside the vacuum hose and approx. 10' extends from the end of the hose
2: Swivel cuffs with openings for internal water hose
1: 3/4" Brass swivel connector with rubber gasket (screws onto water spigots, garden hoses, water heaters and slop sinks)
How it works:
Plug the vacuum hose adapter into your 2-1/4" vacuum opening.
Screw the brass water hose fitting onto your water source.
Pull the handle on the upholstery tool and it sprays just like an extractor!
For best results, use a hot water source.
Benefits of the Nextractor:
Eliminates repairing costly extractor parts, such as: motors, heating elements, tanks and electronics.
Allows you to use your current vacuum as an extractor and a vacuum.
Nextractor is heavy duty, lightweight, flexible and has a low profile tool design for ease of use!
*Please Note: this hose is designed to be used with low pressure water systems (40-80 lbs) and should not be retrofitted to high pressure machines
How can shampoo be dispensed thru the water hose if its only 1 water hose & no shampoo tube? The only thing I know is it connects onto water heater; buth its length is a bit short from vacuum hose end (25 ft?)
Can the upholstery nozzle be changed or is it glued onto the vacuum hose cuff?
Is the nextractor worth the $ or should i stick to the shop-vac steam team? The shop-vac steam team is several yrs old (1980s/90s?) & parts for the steam team are most likely discontinued
shop-vac steam team in upholstery/small area shampooing mode connected onto Ridgid vac
67507