2 black vehicles from 2 different dealers. Both hammered. Denali, LX570

[Justin at Final Inspection]

I had 2 vehicles this week that were purchased from different dealers and different times from different clients. First up was a GMC Sierra Denali

This truck was a favor as he is my chassis guy/welder and will be doing my chromoly 10 point roll cage in another week or so.

Wash/Decon- Hyper wash, Megs Iron Decon, Nanoskin fine towel

Wheels/tires- Mckees foaming wheel cleaner gel, LATA, Hyper dressing, Coated in IGL Eclipse

Correction- G21, B/S Uro Wool, M100. 3D One, B/S yellow pad

Trim- Coated in IGL Eclipse

LSP- IGL Kenzo


50/50 Video

YouTube (https://youtu.be/pi8ISuL2M5M)


https://i.imgur.com/L1cj7tY.jpg

https://i.imgur.com/pnjPa2w.jpg

https://i.imgur.com/AD8DyAI.jpg

https://i.imgur.com/eKwNjv2.jpg

https://i.imgur.com/aoJMmoL.jpg

https://i.imgur.com/gib1Gz5.jpg

https://i.imgur.com/P80oFEH.jpg

https://i.imgur.com/OvYJVxk.jpg

https://i.imgur.com/orIxQ4a.jpg

https://i.imgur.com/823gRZ1.jpg



Next up was this 2016 Lexus LX570 with black tinted clear coat.

Wash/Decon- Rinsless wash with Wipeout, Nanoskin fine towel

Wheels/Tires- Mckees foaming wheel cleaner gel, LATA, Hyper dressing

Correction- G21, 3D ONE to cut with Boss Microfiber pad, Then switched right to a black finishing pad with 3D ONE to finish

LSP- IGL Poly

Here's a time lapse video I did showing a before and after of the door

YouTube (https://youtu.be/dWR9unu57m4)


https://i.imgur.com/hNuam8m.jpg

https://i.imgur.com/6QaUrad.jpg

https://i.imgur.com/ltPjw4r.jpg

https://i.imgur.com/dJMrXjt.jpg

https://i.imgur.com/ilR8zAC.jpg

https://i.imgur.com/TE1Zm2c.jpg

Also Had my new shop forman help lay down the coating with me

https://i.imgur.com/sgr6MAG.jpg

https://i.imgur.com/Aokk44L.jpg

https://i.imgur.com/Rz40pfQ.jpg

https://i.imgur.com/LTVqcwi.jpg

[Aaryn NZ]

Yeah buddy! :props:

I followed along with these ones on Facebook. Not only did you fix all the inflicted damage, you created finishes these vehicles didn’t even have NEW! :urtheman:

Jaw dropping Justin, beautiful work my friend - thank you for sharing. :props:


Aaryn NZ. :dblthumb2:

[Sizzle Chest]

They were indeed hammered! Great results!!!

[Mike lambert]

Excellent work! I think the guys from around here must be expanding! LOL!

[Mike@DedicatedPerfection]

Wow! Thats how you get er done! Nice work Justin!

[TMQ]

Jeepers! I can't keep up with you!

Awesome work as always. This and the Nissan GTR...!

Tom

[PaulMys]

Very nice saves, Justin!

I can't believe how bad dealers are with paint. It's horrifying.

[Justin at Final Inspection]

Thanks guys. Yeah it's pretty bad around here with dealership's

[fightnews]

Cool great job. did you use the G21 on all panels on both cars? Even the fenders and curves?

[fightnews]

Very nice saves, Justin!

I can't believe how bad dealers are with paint. It's horrifying.

I know right. You would think they would know better. Can't even blame the guys they hire when they are being poorly trained and unaccountable.

[PaulMys]

I know right. You would think they would know better. Can't even blame the guys they hire when they are being poorly trained and unaccountable.

The poor guys have no choice. I work at a dealer.

Salesman will sell a car (Spot Delivery), and they expect the detail guys to take a car that has been sitting outside for 1, 2, or 3 months and have it looking "Show Quality" in about 90 minutes.

Asinine.

Of course, a car salesman has NO idea what "Show Quality" is. Smh.

[meedz73]

Amazing results!!! What a finish on both cars!

Sent from my ONEPLUS A6013 using Tapatalk

[Justin at Final Inspection]

Cool great job. did you use the G21 on all panels on both cars? Even the fenders and curves?

For the most part yes. But I did use my swirl killer mini.

[2wookies]

Interesting choice with M100, the dusting doesn't drive you up the wall?

Found that CarPro Clear cut has a much better ability at low dust.

[Justin at Final Inspection]

Interesting choice with M100, the dusting doesn't drive you up the wall?

Found that CarPro Clear cut has a much better ability at low dust.


Different strokes. I'm not a huge fan of Clearcut especially for the price.