Best ‘dust repelling’ QD?

[cardude2000]

I am testing/switching between Gtecniq QD, reload, Elixer and MG156.

Used Elixer yesterday and pollen/dust seemed to be attracted to it like a magnet. Not sure if it was just an especially dusty day or what...

Curious if people have thoughts on the best QD when it comes to dust repellency?

[acuRAS82]

I would have thought you’re on the right track using QDs meant for codings (excluding D156), but I guess Elixir doesn’t help much.

Some old school ones people liked were FK425, Poorboys Spray and Gloss, BF WW with polycharger, UWW+ with polycharger, etc., but I never thought those did too much better than any other sealants as far as dust/pollen resistance.

[FUNX650]

IMO:
•Due to the existence of certain laws of Physics:
-there are currently no “Best” dust repelling QDs;
-or, as far as that goes, not even any: good, pretty
good, or not so good ones.

***************************************

•Perhaps, one day, the manufacturers of car-care
products will be able to draw from the (very deep)
NASA-well of Materials Sciences information, and
be able to translate some of that information into
reasonably priced dust mitigation systems/products
for our vehicles.


•And...With the near-future of vehicles now being
geared toward them being “electrically powered”...
-I can envision dust mitigation systems/products
being something along the lines of an “Electrodynamic
Dust Shield” (EDS):

________________________________________________

http://www.autogeekonline.net/gallery/data/500/8D7438C3-3C29-4208-988B-2E01FC84C95B.jpeg

_________________________________________________



Bob

[BadgerRivFan]

It’s pollen season right now. Wait a month or so and you’ll be perfectly happy with what you already have.

[PaulMys]

IMO:
•Due to the existence of certain laws of Physics:
-there are currently no “Best” dust repelling QDs;
-or, as far as that goes, not even any: good, pretty
good, or not so good ones.

***************************************

•Perhaps, one day, the manufacturers of car-care
products will be able to draw from the (very deep)
NASA-well of Materials Sciences information, and
be able to translate some of that information into
reasonably priced dust mitigation systems/products
for our vehicles.


•And...With the near-future of vehicles now being
geared toward them being “electrically powered”...
-I can envision dust mitigation systems/products
being something along the lines of an “Electrodynamic
Dust Shield” (EDS):

________________________________________________

http://www.autogeekonline.net/gallery/data/500/8D7438C3-3C29-4208-988B-2E01FC84C95B.jpeg

_________________________________________________



Bob

There needs to be an Electrodynamic Dust Shield (EDS) button on the center console. :)

[cardude2000]

I would have thought you’re on the right track using QDs meant for codings (excluding D156), but I guess Elixir doesn’t help much.

Some old school ones people liked were FK425, Poorboys Spray and Gloss, BF WW with polycharger, UWW+ with polycharger, etc., but I never thought those did too much better than any other sealants as far as dust/pollen resistance.

Polychargers! Waaaaaaaaaa???

Never heard of these till now...

Anyone here use them?

How Polycharger Works (https://www.autogeek.net/polycharger-how-it-works.html)

[acuRAS82]

Polychargers! Waaaaaaaaaa???

Never heard of these till now...

Anyone here use them?

How Polycharger Works (https://www.autogeek.net/polycharger-how-it-works.html)

Good find. I only use some products that they are already included in (BF Sealant/Synthetic Spray/WW, 4* UPP/Spray Wax, maybe Ultima Acrylic Spray Wax if I recall). I’ve never bought it for mixing on my own but I recall some others here doing it.

[Bruno Soares]

I’m not sure which one is the best but I can almost bet Bead Maker is the worst. It seems to make the paint very static (as well as glossy and slick). That means dust and pollen stick really well to the paint. I’m about to give up using it completely.

[Larry A]

Duragloss Aquawax and Fast Clean and Shine.

[Oz_TCH]

https://s.yimg.com/aah/autogeek/griot-s-garage-foaming-poly-gloss-3.gif


By using polymers that deliver fast drying and anti-static properties for a long lasting clean

[fightnews]

I am testing/switching between Gtecniq QD, reload, Elixer and MG156.

Used Elixer yesterday and pollen/dust seemed to be attracted to it like a magnet. Not sure if it was just an especially dusty day or what...

Curious if people have thoughts on the best QD when it comes to dust repellency?

where do you live? Pollen season just started like yesterday. It's only going to get a lot worse from here. It goes away by mid June usually but nothing will keep the pollen off a car.

Best thing you can do is be careful washing it off and hope for a lot of rain.

[fightnews]

Polychargers! Waaaaaaaaaa???

Never heard of these till now...

Anyone here use them?

How Polycharger Works (https://www.autogeek.net/polycharger-how-it-works.html)

Its marketing mumbo jumbo. You can't beat mother nature

[ecirwin]

Sorry for reviving an old thread but it is exactly what I was looking for.

I just did a full detail, paint correction, and application of CQUK3 and Reload. I went to home depot (~8 mile roundtrip) after the car had sat in the garage for 3 days since the last application of Reload and nearly a week after the application of CQUK3. When I got home, the hatch on my Golf was covered in dust. Most of that dust came off pretty easy with a blast from the air gun. There were also a few bits of debris on the side of the car that also seemed to come off with a blast of air. I was hoping that the car would stay cleaner than it has so far.

I know that it is not a QD but I have found that Sonax Polymer Net Shield did an outstanding job of keeping the dust to a bare minimum. I drove about 350 miles on a road trip after applying it a few years ago on a black car and had to look closely to find any dust on the surface and even then it was only on the hatch. I would hate to try to apply Polymer Net Sheild over the CQUK3. I'm not even sure it would bond. I might have to do that to see if I get similar results.

[The Guz]

Sorry for reviving an old thread but it is exactly what I was looking for.

I just did a full detail, paint correction, and application of CQUK3 and Reload. I went to home depot (~8 mile roundtrip) after the car had sat in the garage for 3 days since the last application of Reload and nearly a week after the application of CQUK3. When I got home, the hatch on my Golf was covered in dust. Most of that dust came off pretty easy with a blast from the air gun. There were also a few bits of debris on the side of the car that also seemed to come off with a blast of air. I was hoping that the car would stay cleaner than it has so far.

I know that it is not a QD but I have found that Sonax Polymer Net Shield did an outstanding job of keeping the dust to a bare minimum. I drove about 350 miles on a road trip after applying it a few years ago on a black car and had to look closely to find any dust on the surface and even then it was only on the hatch. I would hate to try to apply Polymer Net Sheild over the CQUK3. I'm not even sure it would bond. I might have to do that to see if I get similar results.

Welcome to the forum. You have just rubbed all over the paint and created static. Wait until after the first wash. No need to mask the coatings behavior with another product.

Static Electricity and Dust Attraction to your Car's Paint (https://www.autogeekonline.net/forum/how-to-articles-by-mike-phillips/29355-static-electricity-dust-attraction-your-cars-paint.html)

[ecirwin]

Thanks Guz. The last of that posting you linked suggests that a QD will reduce the static charge. In my case, I have used Reload (a QD) 4 or 5 times since finishing the CQUK3. The car been in the garage and I have been sheltering in place. It looks so good that it has been rewarding to apply Reload multiple times.

The dusting problem is nothing new and anyone that owns a hatchback knows how quickly the dust will accumulate. It was good to see that 95% of the dust came off with a blast from the air hose. I have seen other products that probably only 50% of the dust would come off with an air blast.

It will be interesting to see what happens after the first wash. I will resist the urge to wipe the car down with Reload after the first wash.

All of this made me wonder if it would be possible to have some conducting thread included in a microfiber towel (like that used in "touch sensitive gloves") that might reduce this tendency to build static charge? Of course we wouldn't want that thread to be anything that might damage the paint.