1937 Chevrolet Truck.

[Aaryn NZ]

Hello folks. :xyxthumbs:

Easter Monday here in New Zealand & I’ve treated myself to spending the last four days hangin’ out with my gorgeous family.

Had a little time this morning to get amongst it & do some reading/browsing & the odd comment here & figured I throw a few pictures of something together & make a “Show N’ Shine” of this neat ‘37 Truck.

Gill Consttuction is a local construction company here in my home town ‘ although I know little about their history I do know they have been around a long time.

Recently they contacted me to carry out some detailing on this beauty for display purposes for an agricultural/farm machinery show & I was all too happy to schedule it in.

The restoration on the ‘37 was carried out a couple of years ago & on initial inspection it was pretty clear there had never been any ‘finishing’ work carried out. The paintwork felt like 60 grit sandpaper!!! There was overspray on all the bright work & I doubt they had ever shut the doors or windows before, during or after restoration was carried out because the interior was a mess.

Cardinal sin not having any ‘before’ pictures to show the true story but the Weather didn’t play nice for that part.

Because of the condition it arrived in I had little choice but to carry out a traditional wash process - full decontamination, chemical/mechanical, the chassis, deck, engine all received a thorough scrub down. Drying it off & bringing it into the shop for further inspection & a test spot to be carried out revealed this wasn’t a base/clear paint system & my heart sank a little.

I love working with single stage paint & I knew the potential this truck had but I was confined to the clients budget & wishes but set about doing the best I could for everyone.

The interior was incredibly dusty & my concerns about the painted surfaces were erased after a gentle waterless wash showed they were in good shape & not all scratched up like I had expected. These received a good wipe down with CarPro Reload & looked the biz. The uncoated leather seat got a carefull cleaning with a leather soap & conditioner (un-named brand) & was left soft, supple & stunning. Rubber floor mat was heavily ribbed & horribly dirty. I attacked this with an APC & vapour steam to achieve best results.


https://uploads.tapatalk-cdn.com/20190421/4f6ce3615c37ba354239009535d58332.jpg

https://uploads.tapatalk-cdn.com/20190421/e40833641ae65560c06bf843f8b755a6.jpg

https://uploads.tapatalk-cdn.com/20190421/0f4b287881cd71fb72dbea8fa0339dd7.jpg

https://uploads.tapatalk-cdn.com/20190421/5ce613a0d88e832abf668b301bdae8bd.jpg

https://uploads.tapatalk-cdn.com/20190421/8bd78a2557f51187332fb5abb2fad90a.jpg

https://uploads.tapatalk-cdn.com/20190421/324ccfceae0cf91b8423c44f38c5437c.jpg


Following the interior I set about going over the bright work, wheels, chassis rails etc & engine compartment with 3D HD Speed by hand.

Onto the paintwork. On the softer side & to get the ‘cut’ I wanted meant haze or holograms, so for best results three steps were going to be required in a two step time frame.
Going the Rotary route for the initial cutting was going to be the fastest way to do this so the Cordless Flex PE 150 was called up, Lake Country Orange Hybrid pads & 3D ONE carried out the grunt work. :buffing:

Hologram removal & refining the finish was done with the Flex 3401, Lake Country Orange SDO pads & again - (using Justin Sherwood’s technique of not wiping off the residue from the previous step) 3D ONE.

To finish off I enlisted the help of the Flex XFE15-150 Cordless polisher, CarPro Gloss Pads & CarPro Essence Plus to give it that super slick feel & glossy punch that Essence Plus delivers.

Tyres dressed with CarPro Perl & Glass dome with Meguiars D120.


A couple of pictures of the paint condition before polishing.

https://uploads.tapatalk-cdn.com/20190421/eec3903a48724de6d6cd3ddd69a2a239.jpg

https://uploads.tapatalk-cdn.com/20190421/45c879b83fcdd0f1c5c0d4479da9ac0a.jpg

https://uploads.tapatalk-cdn.com/20190421/960e5bd416460420f5bbcb33150df329.jpg


Fairly ugly to say the least.

Random picture of the gang taking a break. :xyxthumbs:

https://uploads.tapatalk-cdn.com/20190421/b2d70bd4fdf2f84ab01c72d08606744c.jpg


A picture to show that I do actually get my hands dirty. :buffing:

https://uploads.tapatalk-cdn.com/20190421/32657d6b8fbda7c463acc774fb0081f8.jpg

https://uploads.tapatalk-cdn.com/20190421/05bf42ed07081f8a9aa360e9666c7f62.jpg


Right, onto the beauty shots.

Like I mentioned - I would love to have taken this further in terms of results but alas, I still have to treat this as a business. Results weren’t all that bad to be fair. :xyxthumbs:


https://uploads.tapatalk-cdn.com/20190421/332b8373a25f93de69bb328b95d5fe19.jpg

https://uploads.tapatalk-cdn.com/20190421/c8a9dd5ead211224cac5988047ae3d36.jpg

https://uploads.tapatalk-cdn.com/20190421/2cbb936d130cac5eeafc107f41bccc30.jpg

https://uploads.tapatalk-cdn.com/20190421/482b7bf74d755a2f4ac2b087f88868e3.jpg

https://uploads.tapatalk-cdn.com/20190421/df62f6b3ba0d99a79177263906a81ea6.jpg

https://uploads.tapatalk-cdn.com/20190421/b801f64d7290c4ad760664bd180dff0c.jpg

https://uploads.tapatalk-cdn.com/20190421/864730d9c9063f980dbcc84ea7ac3c93.jpg

https://uploads.tapatalk-cdn.com/20190421/6da937904ae82c5982d29142c9a290ad.jpg

https://uploads.tapatalk-cdn.com/20190421/fd5f158efc3e56eee90432e4ac923386.jpg

https://uploads.tapatalk-cdn.com/20190421/f9f6f803da1829d3d6da64b14f9df49e.jpg

https://uploads.tapatalk-cdn.com/20190421/67d166930d37eddd1408742107778f87.jpg

https://uploads.tapatalk-cdn.com/20190421/91fb9db250379730199eb57512a70127.jpg

https://uploads.tapatalk-cdn.com/20190421/57a473317d0667086a0bb6d46bd20c09.jpg

https://uploads.tapatalk-cdn.com/20190421/264fbb55dc81d86a5cf7e3540d48c88e.jpg

https://uploads.tapatalk-cdn.com/20190421/ff6272e0cdcb101e4b270790e6ead755.jpg

https://uploads.tapatalk-cdn.com/20190421/b53f1cabc16468fe5adc6ce4d0d82fd2.jpg

https://uploads.tapatalk-cdn.com/20190421/125835bad320f56c549c746fead0773a.jpg

https://uploads.tapatalk-cdn.com/20190421/84af85ac76577b2e1fd0279a2f74237e.jpg

https://uploads.tapatalk-cdn.com/20190421/439ad9b19a6e693ac013d2035d021191.jpg

https://uploads.tapatalk-cdn.com/20190421/3548dc41789383f5a3d6a92b84d9fa2e.jpg

https://uploads.tapatalk-cdn.com/20190421/41c5cb882f4096ed446d359187c16c4f.jpg

https://uploads.tapatalk-cdn.com/20190421/c71648f7b0b7c8296c440648e86578bd.jpg

https://uploads.tapatalk-cdn.com/20190421/e5d70070a686179c4189731da734ff51.jpg


Thank you all for checkin’ in & taking a look. Happy Easter everyone.


Aaryn NZ. :dblthumb2:

[Misterpaul]

Stunning turnaround! Is the yellow hand the turn signal?

Happy Easter to you as well.

[PA DETAILER]

Fantastic!

[joleyred]

What a beautiful truck and fantastic job of detailing it. I would love to drive that to the feed store and get a few bags of corn.......

Sent from my SM-G955U using Tapatalk

[Sizzle Chest]

Great work Aaryn! Looks really good! Nice single stage!!!

[fly07sti]

Niiiice. Love that blue.

[Justin at Final Inspection]

Wow what a cool truck! And what a nice job bud. That thing looks incredible.

[Mike Phillips]

Wow!

That is an incredibly cool work truck! The paint looked hammered! Just like you would expect the paint to look on a working work truck.

https://uploads.tapatalk-cdn.com/20190421/960e5bd416460420f5bbcb33150df329.jpg



Great to see you using the FLEX PE14 Cordless Rotary for the major correction steps. I told Bob Eichelberg at Barrett-Jackson about you and your passion for the craft. Mentioned you would be a great candidate for any prototypes in the future as well as early release of the CBEAST.

https://uploads.tapatalk-cdn.com/20190421/32657d6b8fbda7c463acc774fb0081f8.jpg




You truly work on a LOT of cool cars. You have built-up a reputation that the owners of any cool cars in New Zealand find out about you and then trust you with their toys.


Even better is when these people trust you with their cars they have chosen wisely. Just as important as the work is going to be done right the first time is the fact that it won't be done wrong. Paint is thin - you want the right guy the first time.


Thanks always for sharing your incredible work Aaryn.


:dblthumb2:

[PaulMys]

That is incredible!!!

Really nice job, brother!! :props:

[MAXBKS]

Awesome!! :wow:

[RTexasF]

That's a home run in anyone's book. Love the turn signal.....do you point it straight up to make a left turn? Yes I was born well before turn blinkers so I learned the hand signals but steering was on the opposite side here.

[Aaryn NZ]

Stunning turnaround! Is the yellow hand the turn signal?

Happy Easter to you as well.

Thank you Misterpaul. :xyxthumbs:

Indeed it is . . . . Handing for giving a cheeky cyclist or pedestrian a hurry up too I would say. :props:



Fantastic!

Cheers pro 4x! :xyxthumbs:



What a beautiful truck and fantastic job of detailing it. I would love to drive that to the feed store and get a few bags of corn.......

Sent from my SM-G955U using Tapatalk

Thank you jolly red. :xyxthumbs:

Appreciate the kind words. For sure, it’d be the coolest truck at the feed store. :props:


Great work Aaryn! Looks really good! Nice single stage!!!

Thanks Scott. :xyxthumbs:

Yep, love me some single stage! Would have liked to have gone further on this one . . .


Aaryn NZ. :dblthumb2:

[Aaryn NZ]

Niiiice. Love that blue.

Thank you Brother. :xyxthumbs:



Wow what a cool truck! And what a nice job bud. That thing looks incredible.

Thanks Justin. :xyxthumbs:

Yeah she’s pretty cool. Could do with power steering though.



Wow!

That is an incredibly cool work truck! The paint looked hammered! Just like you would expect the paint to look on a working work truck.

https://uploads.tapatalk-cdn.com/20190421/960e5bd416460420f5bbcb33150df329.jpg



Great to see you using the FLEX PE14 Cordless Rotary for the major correction steps. I told Bob Eichelberg at Barrett-Jackson about you and your passion for the craft. Mentioned you would be a great candidate for any prototypes in the future as well as early release of the CBEAST.

https://uploads.tapatalk-cdn.com/20190421/32657d6b8fbda7c463acc774fb0081f8.jpg




You truly work on a LOT of cool cars. You have built-up a reputation that the owners of any cool cars in New Zealand find out about you and then trust you with their toys.


Even better is when these people trust you with their cars they have chosen wisely. Just as important as the work is going to be done right the first time is the fact that it won't be done wrong. Paint is thin - you want the right guy the first time.


Thanks always for sharing your incredible work Aaryn.


:dblthumb2:

Thank you Mike. :xyxthumbs:

Incredibly kind words my friend, thank you.:props:

I have always been a fan of Rotary Polishers & I guess with great tools like the Flex 3401 a lot of the time a Rotary isn’t needed & eliminating a ‘clean up’ step is handy but they do smash through the grunt work, are very precise & fun to use. Especially the cordless PE 150. So beautifully balanced, I feel very much a part of this tool when I use it, it’s almost like it was made just for me. :buffing:

Again Mike - thank you for the kind words & for taking the time to comment. :props:


Aaryn NZ. :dblthumb2:

[Aaryn NZ]

That is incredible!!!

Really nice job, brother!! :props:

Thank you PaulMys. :xyxthumbs:

Appreciate your comments always mate. :props:



Awesome!! :wow:

Cheers MAXBKS. :xyxthumbs:



That's a home run in anyone's book. Love the turn signal.....do you point it straight up to make a left turn? Yes I was born well before turn blinkers so I learned the hand signals but steering was on the opposite side here.

Thank you RTexasF. :xyxthumbs:

You know, I had wondered how you were supposed to make a left turn without being awfully busy if you had to change the hand position. Thanks for commenting buddy! :props:


Aaryn NZ. :dblthumb2: