Mike Phillips
04-17-2019, 09:38 AM
Washing and cleaning Compound and Polish Self-Cleaning Caps (https://www.autogeekonline.net/forum/ask-mike-phillips-your-detailing-questions-/122880-washing-cleaning-compound-polish-self-cleaning-caps.html)
I have a policy for all my classes and that is, everyone gets their own tool. Or in the case of a compound, polish or any product, everyone has the product in their hand. This means a LOT of products in any of our classes and this means a lot of bottles and a lot of CAPS.
While self-cleaning caps are supposed to keep themselves clean, they do tend to still clog up. What happens is the caps become clogged with product, especially the thicker products like compounds. Then it's a real pain in the butt to squirt some product out.
RUPES Compound & Polish Caps
Before all my classes I clean all the caps so my students have a GREAT EXPERINECE (no matter what they are doing). In the past I have tried using a nylon brush with an air squirter with compressed air and this kind of work but it's messy as you end up spraying compound/polish splatter over yourself. Jason and I actually did this the night before our class shared in this write-up.
Pictures: RUPES Detailing Class with Jason Rose & Mike Phillips (https://www.autogeekonline.net/forum/autogeek-roadshow-detailing-classes/120654-pictures-rupes-detailing-class-jason-rose-mike-phillips.html)
Another time I took all the caps to the nearest sink and using a nylon brush and running hot water scrubbed them all clean. This too worked but was very time consuming.
Yesterday while setting up for the upcoming May class and packing for a private Roadshow class, I have an idea? How about opening the nozzle on the caps and running them through the washing machine?
Worked GREAT!
http://www.autogeekonline.net/gallery/data/722/Washing_RUPES_Caps_01.jpg
http://www.autogeekonline.net/gallery/data/722/Washing_RUPES_Caps_02.jpg
Ready to re-install on all my RUPES products for the upcoming RUPES Training Class the first weekend in May.
http://www.autogeekonline.net/gallery/data/722/Washing_RUPES_Caps_03.jpg
SONAX Caps
Just went through and removed all the SONAX CutMax and EX O4-O6 Caps and am running them through the washing machine. The SONAX caps don't clog much but while I'm topping off bottles I figure might as well remove all the finger germs off the caps.
http://www.autogeekonline.net/gallery/data/722/Washing_SONAX_Caps_01.jpg
http://www.autogeekonline.net/gallery/data/722/Washing_SONAX_Caps_02.jpg
http://www.autogeekonline.net/gallery/data/722/Washing_SONAX_Caps_03.jpg
http://www.autogeekonline.net/gallery/data/722/Washing_SONAX_Caps_04.jpg
This class is almost sold out but contact Andre to find out.
Andre - 1-800-869-3011 x244
:)
I have a policy for all my classes and that is, everyone gets their own tool. Or in the case of a compound, polish or any product, everyone has the product in their hand. This means a LOT of products in any of our classes and this means a lot of bottles and a lot of CAPS.
While self-cleaning caps are supposed to keep themselves clean, they do tend to still clog up. What happens is the caps become clogged with product, especially the thicker products like compounds. Then it's a real pain in the butt to squirt some product out.
RUPES Compound & Polish Caps
Before all my classes I clean all the caps so my students have a GREAT EXPERINECE (no matter what they are doing). In the past I have tried using a nylon brush with an air squirter with compressed air and this kind of work but it's messy as you end up spraying compound/polish splatter over yourself. Jason and I actually did this the night before our class shared in this write-up.
Pictures: RUPES Detailing Class with Jason Rose & Mike Phillips (https://www.autogeekonline.net/forum/autogeek-roadshow-detailing-classes/120654-pictures-rupes-detailing-class-jason-rose-mike-phillips.html)
Another time I took all the caps to the nearest sink and using a nylon brush and running hot water scrubbed them all clean. This too worked but was very time consuming.
Yesterday while setting up for the upcoming May class and packing for a private Roadshow class, I have an idea? How about opening the nozzle on the caps and running them through the washing machine?
Worked GREAT!
http://www.autogeekonline.net/gallery/data/722/Washing_RUPES_Caps_01.jpg
http://www.autogeekonline.net/gallery/data/722/Washing_RUPES_Caps_02.jpg
Ready to re-install on all my RUPES products for the upcoming RUPES Training Class the first weekend in May.
http://www.autogeekonline.net/gallery/data/722/Washing_RUPES_Caps_03.jpg
SONAX Caps
Just went through and removed all the SONAX CutMax and EX O4-O6 Caps and am running them through the washing machine. The SONAX caps don't clog much but while I'm topping off bottles I figure might as well remove all the finger germs off the caps.
http://www.autogeekonline.net/gallery/data/722/Washing_SONAX_Caps_01.jpg
http://www.autogeekonline.net/gallery/data/722/Washing_SONAX_Caps_02.jpg
http://www.autogeekonline.net/gallery/data/722/Washing_SONAX_Caps_03.jpg
http://www.autogeekonline.net/gallery/data/722/Washing_SONAX_Caps_04.jpg
This class is almost sold out but contact Andre to find out.
Andre - 1-800-869-3011 x244
:)