PDA

View Full Version : Black 2003 Porsche 911. Paint Correction. Gyeon One Coating - Mirror Reflections Auto Spa


Rod73
03-09-2019, 07:46 PM
https://www.youtube.com/watch?v=U7hde-lKWhQ&feature=youtu.be



My apologies for being away from the forum for so long.


PRODUCTS:


Wolfgang Uber Rinseless Wash (wash and clay lubricant)
P21S Total Auto Wash



Meguiars 1000, 1500, 2000, 2500 grit sand paper (for headlight restoration)


Polish
Gyeon Polish
Menzerna 3500
Jescar Medium Polish
Menzerna FG400


Rupes Duetto
Porter Cable with 3inch backing plate


Gyeon Q2 One (Paint)
Carpro DLUX (Headlights and Trim)




Interior
Gtechniq Tri-Clean
Optimum Fabric Cleaner & Protectant
Leatherique Twins (Rejuvenator Oil and Pristine Clean)
Rsurfer
03-09-2019, 08:00 PM
Very nice recovery. Being the paint was thin to begin with and working on soft paint, was FG400 needed?
Rod73
03-09-2019, 08:26 PM
Very nice recovery. Being the paint was thin to begin with and working on soft paint, was FG400 needed?


Thank you!

There were some clear visual (to me) and measurable signs of repainted panels. Some areas of the car I was more comfortable than others being SOMEWHAT more aggressive. The hood recieved a slight enhancement. One time with FG 400 using some foam pads was took me exactly where I wanted to go in a couple of areas that I gave the green light. I may have actually used FG 400 almost as much with the headlights. Jescar Medium with an medium aggressive pad was a satisfactory combination in some areas. I still used a finishing Polish to add that slight bit of clarity and a tiny bit more cut.
PaulMys
03-09-2019, 08:42 PM
Very nice. Cool car too!
SWETM
03-10-2019, 02:33 AM
Great work and well done video!

/ Tony
Final Detail
03-10-2019, 06:22 AM
Very nice work and really enjoyed the video.
mbkite
03-10-2019, 04:05 PM
Rupes duetto with 3 inch backing plate. How did you put lake county backing plate on it Thanks
mbkite
03-10-2019, 04:10 PM
Awsom job
Sizzle Chest
03-10-2019, 09:28 PM
Nice work, came out extremely well!!!!
Rod73
03-11-2019, 12:59 PM
Rupes duetto with 3 inch backing plate. How did you put lake county backing plate on it Thanks The 3 inch backing plate was put on the Porter Cable.
Rod73
03-13-2019, 05:03 AM
Thank you everyone!!!