How to remove expired tag sticker?

[hooked]

Every year it’s the same struggle with the expired registration sticker that you put on your the license plate. At least in Florida, when you renew your car’s registration, you get a small yellow sticker with the expiration month and year. I always try to take off the old one, but I think they’re designed to be almost impossible to remove in one piece so they can’t be peeled off and put on another car.

Has anyone figured out an easier way of taking these off? I spent 25 minutes the other day trying to get it off. I ended up using a flat head screwdriver and gouging the hell out of the plate. I probably could have taken more time and been more careful, but i wasn’t in the mood. I’ve seen other cars where they just put the new one on a different spot on the tag so they end up with 10 stickers all over it. I don’t think that’s they way it’s supposed to work.

I also had the thought that maybe these would be easier to remove if you just put the new one on top of the old ones so you build up a thick layer and then after a few years, they’ll all come off in one piece. Kind of like Plastidip which is easier to peel off if it is applied with many layers.

[Bruno Soares]

I live in PA and we had to do the same up until last year. I just carefully placed each sticker on top of the previous ones. I had 9 stacked by the time they said no more stickers.
The more recent ones, say 5 years old or so, came out easily. The really old ones not so much. I used a plastic razor blade and that helped me clean it up but it did leave 2 spots with a small scratch on the plate’s painted surface.

[hooked]

I live in PA and we had to do the same up until last year. I just carefully placed each sticker on top of the previous ones. I had 9 stacked by the time they said no more stickers.
The more recent ones, say 5 years old or so, came out easily. The really old ones not so much. I used a plastic razor blade and that helped me clean it up but it did leave 2 spots with a small scratch on the plate’s painted surface.

Interesting. What is the system now since the state did away with the stickers? I might just do the stacking thing and eventually they send me a new tag and then start over.

[BillE]

I use an X-Atco 1/4" chisel blade that is honed down like a razor. Just be gentle and they will lift. Tad bit of solvent to remove the left over adhesive and all good. Having the license plate 'warm' helps a bunch. 'Nuther words, put it in the sun (or similar) for a bit.

Bill

[SWETM]

3M General Purpose Adhesive Cleaner, bug and tar remover, adhesive remover, decal remover, tree sap remover (https://www.autogeek.net/3m-adhesive-cleaner.html)

Use to desolve most adhisive. Q-tips and work your way through the adhisive with a wide plastic tool of some kind, like a plastic razor. Put a mf towel or any other towel under where you spray it on if you go that route. Just let the chemicals dwell enough.

Edit: You can use a electric hair dryer to soften the adhisive up a bit.

[Bruno Soares]

Interesting. What is the system now since the state did away with the stickers? I might just do the stacking thing and eventually they send me a new tag and then start over.

I guess they realized cops can pull up your plate and check the status anyways. So saves money making and mailing stickers to everyone.

[FUNX650]

On some of our vehicles:
•I just stack ‘em.

On the other ones:
•Heat gun/hair dryer (set on low heat)
•Plastic razor blade(s)
•3M Adhesive Remover


Bob

[Rsurfer]

On another note..what about safety inspection stickers on plastic bumpers?

[FUNX650]

On another note..what about safety inspection stickers on plastic bumpers?


https://anrvandadog.com/Pics/after_cleaning.gif


Bob

[Desertnate]

On another note..what about safety inspection stickers on plastic bumpers?

Are you in Hawaii? That's the only state I've ever lived which put them in that location and I found them impossible to remove. I still occasionally see cars at work with Hawaii inspection stickers years after the owner has moved back to the mainland.

I recall seeing these little metal plates people either attached to the bottom of the lisence plate bracket or mounted to hange below the bumper. The sticker was applied to the metal plate to save the paint. I have no idea if they were fabricated in a shop or actually purchased somewhere.

[Rsurfer]

Are you in Hawaii? That's the only state I've ever lived which put them in that location and I found them impossible to remove. I still occasionally see cars at work with Hawaii inspection stickers years after the owner has moved back to the mainland.

I recall seeing these little metal plates people either attached to the bottom of the lisence plate bracket or mounted to hange below the bumper. The sticker was applied to the metal plate to save the paint. I have no idea if they were fabricated in a shop or actually purchased somewhere.

Your correct. The dealer put the sticker on before I could get a stainless steel plate bought. On my previous iinspection, Midas removed the existing sticker, but I don't know how. I had another dealer for the current inspection sticker, but he put the new one over the old and now the edges are starting to peel back. I guess I'll see if Midas will give away their trade secret.

[NinjaNate]

Harbor Freight heat gun

Sent from my Z798BL using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

[Desertnate]

Your correct. The dealer put the sticker on before I could get a stainless steel plate bought. On my previous iinspection, Midas removed the existing sticker, but I don't know how. I had another dealer for the current inspection sticker, but he put the new one over the old and now the edges are starting to peel back. I guess I'll see if Midas will give away their trade secret.

That's no good. Hopefully Midas will let you know.

I found those stickers unlike anything I've encountered before. They might be indistructable and applied with some magical adhesive. After moving back to the mainland I tried several times to remove the inspection stickers on my wife's car without any success. I just treated them as a less obvious version of those bumper stickers people get showing where they went on vacation...only mine indicated where I lived. The vehicle was sold several years later with the stickers still looking pristine and quite firmly attacked.

[Calendyr]

I have never tried to remove this sort of stickers but there are several ways to remove stickers that works for pretty much anything.

The first thing is to use heat to soften the glue. If you have a heat gun, that is the fastest, otherwise a hair dryer works too and you can also use a steamer.

Once the sticker is really hot, you should be able to peel it off easilly. If not, use a razor blade.

Once the sticker is off, you need to use an adhesive remover to remove the glue. If you are gonna put an other sticker there, this step is optional.

[Rsurfer]

I have never tried to remove this sort of stickers but there are several ways to remove stickers that works for pretty much anything.

The first thing is to use heat to soften the glue. If you have a heat gun, that is the fastest, otherwise a hair dryer works too and you can also use a steamer.

Once the sticker is really hot, you should be able to peel it off easilly. If not, use a razor blade.

Once the sticker is off, you need to use an adhesive remover to remove the glue. If you are gonna put an other sticker there, this step is optional.

I would not hesitate to use a heat gun on paint, but on a plastic bumper... Dunno!