View Full Version : Fkex 3403?
Indiglofish61
10-11-2018, 06:09 PM
I'm looking at the Flex 3493 rotary, but i can't find the rpm list for the speed control numbers, would anyone please let me know, I'm deciding whether i want it for the jeweling step on polishing.
Rsurfer
10-11-2018, 06:23 PM
I guess 1 would mean 1,100 rpm and 6 would be 3,700 rpm. Do the math for 2-5. Just keep in mind that not all speed dials are accurate.
Indiglofish61
10-11-2018, 06:55 PM
Ok thanks I'll do the math.
Sonic Pilot
10-11-2018, 07:13 PM
I agree with Rsurfer, just do the math. Some very practical advice. When you get a chance, send Flex a quick email and have them verify that is in fact a practical guide. They should be happy to give you a little customer support on this technical matter.
Setec Astronomy
10-11-2018, 10:27 PM
From the decal on my 3403:
1 = 1100
2 = 1500
3 = 1900
4 = 2300
5 = 2700
6 = 3700
Dr Oldz
10-12-2018, 01:24 AM
From the decal on my 3403:
1 = 1100
2 = 1500
3 = 1900
4 = 2300
5 = 2700
6 = 3700
Off jump from 5 to 6...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.