View Full Version : Collinite fiberglass boat wax #925
Kiddersdetailing
08-02-2018, 10:37 AM
I signed onto the collinite bandwagon as i will be using marine 31 gelcoat color gloss restor with a purple wool pad on my mille then i was going to follow up with the 925. Can i use a red or black ccs pad to spread this on a da....or stick to the recommended mr miyagi method?
Mike Phillips
08-03-2018, 04:09 AM
I signed onto the collinite bandwagon as i will be using marine 31 gelcoat color gloss restor with a purple wool pad on my mille then i was going to follow up with the 925.
First thing I would do would be a Test Spot.
I'd make sure the products, tools, pads and process works exactly like you hope and dream about before buffing out the entire boat.
Can i use a red or black ccs pad to spread this on a da....or stick to the recommended mr miyagi method?
I would find a way to machine apply everything in life except for ceramic coatings and Meguiar's #7
:)
Dan Tran
08-03-2018, 05:16 AM
There you go Brian! The man himself answering your question.
I agree to machine spread Collinite 925. So much easier!
Kiddersdetailing
08-03-2018, 08:31 AM
First thing I would do would be a Test Spot.
I'd make sure the products, tools, pads and process works exactly like you hope and dream about before buffing out the entire boat.
I would find a way to machine apply everything in life except for ceramic coatings and Meguiar's #7
:)
Thanks mike, i have an array of marine 31 products i'll be doing test spots on all three boats that i'll be working on! i'll post a follow up in a week
Kiddersdetailing
08-07-2018, 10:14 AM
64616
64617
64618
64619
64620
Well!!! success on cleaning this glastron 19' boat up on sunday. mid 2000s, very rough shape as some of the pictures will show you.
Started a 9 am and went till 8 along with your typical sunday brakes (i spent 1.5 hrs washing the boat and trailer sat night, along with my test spots.).
I used my rupes mille with purple wool pads for the heavy cutting and the gg6 with purple wool on the small spots.
I used white ccs with the gel coat color restore and finally a black ccs pad to spread the collinite wax around.
She pops!
64621
64622
:)
Mike Phillips
08-07-2018, 01:35 PM
64616
Well!!! success on cleaning this glastron 19' boat up on Sunday. mid 2000s, very rough shape as some of the pictures will show you.
Started a 9 am and went till 8 along with your typical Sunday brakes (i spent 1.5 hrs washing the boat and trailer sat night, along with my test spots.). I used my rupes mille with purple wool pads for the heavy cutting and the gg6 with purple wool on the small spots. I used white ccs with the gel coat color restore and finally a black ccs pad to spread the Collinite wax around.
She pops!
Freaking Amazing!
http://www.autogeekonline.net/gallery/data/500/beforeback_01.jpg
http://www.autogeekonline.net/gallery/data/500/beforeback_02.jpg
http://www.autogeekonline.net/gallery/data/500/beforeback_03.jpg
I downloaded the above and put them in your gallery here,
Kiddersdetailing Gallery - AutogeekOnline Gallery (https://www.autogeekonline.net/gallery/showgallery.php/cat/500/ppuser/96209)
Nice save!
:dblthumb2: :dblthumb2: :dblthumb2:
PaulMys
08-07-2018, 05:48 PM
Damn!! What a job!
Kiddersdetailing
08-08-2018, 08:55 AM
Hey guys thanks alot!! working with the mille for that long it felt like my third arm haha. that tool is fantastic. I'll be working with marine 31 polish and then #925 again tonight on a 19' that should be a breeze to complete.
DBAILEY
08-08-2018, 09:19 AM
Wow what a difference. Working on boats can be very gratifying because there's always such a huge improvement. They are just so exhausting.
Kiddersdetailing
08-08-2018, 09:30 AM
Hey guys thanks alot!! working with the mille for that long it felt like my third arm haha. that tool is fantastic. I'll be working with marine 31 polish and then #925 again tonight on a 19' that should be a breeze to complete.
Dan Tran
08-08-2018, 05:43 PM
How did you like Collinite 925? Was it everything you had hoped for?
Kiddersdetailing
08-14-2018, 12:41 PM
How did you like Collinite 925? Was it everything you had hoped for?
6473364734
Yeah its great to work with! I just used the gelcoat color restore on the top of the boat, and marine 31 polish on the bottom both with white ccs pads then topped it off with #925 with black on my mille. .
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.