Getting my detailing package today! help me pick a procedure!

[Damnhor2]

Hey guys!
I know this is a newbie question but tomorrow I am getting my detailing package from Autogeek and my car is going through it's first ever 10,000 treatment, I am talking wash, polish, paint sealent, wax, the whole 9 yards!
The only problem is since this is my first time detailing properly I need your help!
So below is a list of the things I am getting, please help me and tell me what is the best process I can do...
What to do and what to use and in which order, thanks guys:

Pinnacle Bodywork Shampoo
Pinnacle Crystal Mist Detail
PAD-TOOL Foam Pad Conditioning Brush
PBPC-KIT-HD Poorboys Porter Cable 7424 Polish
Cobra Blue Micro-Chenille Wash Mitt
12 Qty Cobra Day-Glo Green Microfiber
Pinnacle Ultra Poly Clay Kit
Glass Master Pro Combo
California Water Blade
Case of 6 Stoner Invisible Glass cleaner wipes
Stoner Invisible Glass Pump spray
Klasse Kit
EZ Detail Brush for Car
Pinnacle Wheel & Tire Kit

So as you can see, I pretty much have everything I need, Poorboys porter cable kit, and the Klasse kit, But what to use and with which pad and in which order?

Please help me guys!
I am in need of your knowledge!

By the way!
Here is my car:
http://www.reef-center-host.com/pix/albums/userpics/10059/IMG_2799-res.jpg

So I would want to give it a wet look but something that would bring out the flakes in my paint (A lot of flakes)!

[Rsurfer]

What kind of polish in your kit?

[Damnhor2]

As I said:

Klasse kit:
Klasse Kit, klasse car kit, klasse car care kit (http://www.autogeek.net/klassekit.html)

And
Poorboy's kit:
Poorboy’s Porter Cable 7424 Polish & wax Kit (http://www.autogeek.net/popoprkit.html)

And the pads I have are:
CCS Orange 6.5 inch Light Cutting Pad
CCS White 6.5 inch Polishing Pad
CCS Gray 6.5 inch Finishing Pad

[budman3]

It's hard to tell what to use because we can't see any imperfections in the paint. My guess is that there are moderate swirls on the paint which SSR2.5 and a white polishing pad will remove. Work that in until it is clear and then follow up with SSR1 with a polishing or finishing pad. Check out the link in my signature for tips when using the SSRs. Good luck.

[Rsurfer]

As I said:

Klasse kit:
Klasse Kit, klasse car kit, klasse car care kit (http://www.autogeek.net/klassekit.html)

And
Poorboy's kit:
Poorboy’s Porter Cable 7424 Polish & wax Kit (http://www.autogeek.net/popoprkit.html)

And the pads I have are:
CCS Orange 6.5 inch Light Cutting Pad
CCS White 6.5 inch Polishing Pad
CCS Gray 6.5 inch Finishing Pad
What ever polish you will be using, always start with the least aggressive that goes for the pads as well. Example:Poorboy's, use white pad first, if it doen't get the results you are looking for then go with the orange. After a few details you will know what polish and what pads to use by looking at the paint's condition.

[Damnhor2]

Budman3, I don't understand.
Autogeek says:
"CCS Orange 6.5 inch Light Cutting Pad
Firm, high density foam for scratch and defect removal. Use this pad with polishes and swirl removers. It’s an all around pad that will work on most light to moderate imperfections."

and you said:
"there are moderate swirls on the paint which SSR2.5 and a white polishing pad will remove."

Why would I use SSR2.5 (that removes light to moderate imperfections) with the white pad instead of the orange?

And after the polish I don't need to put a paint sealent or wax?