View Full Version : Polishers
Lumorales1975
04-30-2018, 10:12 AM
Definitely tough to decide which polisher to get. Either rupes or flex [emoji30][emoji30]. I’m looking too buy two new ones and a mini [emoji847]
Sent from my iPhone using Tapatalk
Mike@ShineStruck
04-30-2018, 10:47 AM
If you're planning to buy 3 polishers
Make it a long throw , a forced and a 3inch
It's really simple, don't over complicate things.
Makita PO5000C
Rupes 15 mark 2( can buy a 21mm essentric for it)
GG6 with Griot HD 3in plate
Those are 3 smooth machines for the best bang for your buck..
I mean you can save more $ if you get a Griot boss..but you gain some extra.l vibration(atleast the G21 does).the cure would be a 90$ Rupes Essentric to replace the factory Griot one...which I think would put you past the mark 2 price point.
Sicoupe
04-30-2018, 11:27 AM
Rupes- 15, mini and ibrid nano.
custmsprty
04-30-2018, 02:14 PM
Definitely tough to decide which polisher to get. Either rupes or flex [emoji30][emoji30]. I’m looking too buy two new ones and a mini [emoji847]
Sent from my iPhone using Tapatalk
Rupes Mille
Rupes Duetto
Rupes Mini
And you are pretty much covered.
Ronin47
04-30-2018, 02:24 PM
Rupes 21 MKII
Rupes Mille
Rupes Mini
dlc95
04-30-2018, 06:12 PM
Rupes Mille
Rupes Duetto
Rupes Mini
And you are pretty much covered.
Love it!
Mille is on my radar.
custmsprty
04-30-2018, 06:42 PM
Rupes Mille
Rupes Duetto
Rupes Mini
And you are pretty much covered.
My reasonig for this recommendation is that if you purchase the Mille their is no reason to buy a 15/21 MKII since the Mille fits the bill. The Duetto is light weight and super ergonomic. My two start with polishers are the Duetto and Mini. When I do a test spot I start with the Duetto. I don't own a Mille or a 3401 but I'm also not going to do boats or trailers.
VISITOR
04-30-2018, 06:46 PM
G15/21 + GG6 (w/ different backing plates) = :dblthumb2:
custmsprty
04-30-2018, 07:07 PM
G15/21 + GG6 (w/ different backing plates) = :dblthumb2:
I have the G21 and two GG6's in addition to my Rupes. I use the G21 over my Rupes 15 but still go with the other combo I mentioned first. The GG6 is nice but if money is not a concern I'll take the Duetto all day long.
If you're planning to buy 3 polishers
Make it a long throw , a forced and a 3inch
It's really simple, don't over complicate things.
Makita PO5000C
Rupes 15 mark 2( can buy a 21mm essentric for it)
GG6 with Griot HD 3in plate
Those are 3 smooth machines for the best bang for your buck..
I mean you can save more $ if you get a Griot boss..but you gain some extra.l vibration(atleast the G21 does).the cure would be a 90$ Rupes Essentric to replace the factory Griot one...which I think would put you past the mark 2 price point.
Checked the Rupes website and can't find the 21mm essentric kit.
Can you post a link?
Tom
Lumorales1975
04-30-2018, 10:12 PM
Purchased a Rupes Mille and Rupes mini looking forward to using them [emoji1430][emoji1417][emoji1417]. Thank you for your feedback
Sent from my iPhone using Tapatalk
custmsprty
04-30-2018, 10:15 PM
Purchased a Rupes Mille and Rupes mini looking forward to using them [emoji1430][emoji1417][emoji1417]. Thank you for your feedback
Sent from my iPhone using Tapatalk
Awesome, congratulations. Now all you need is a Rupes Duetto and you are good to go..............:buffing:
Lumorales1975
04-30-2018, 10:28 PM
Awesome, congratulations. Now all you need is a Rupes Duetto and you are good to go..............:buffing:
I definitely going to get it in a few weeks [emoji1430]
Sent from my iPhone using Tapatalk
BudgetPlan1
05-01-2018, 03:23 AM
Checked the Rupes website and can't find the 21mm essentric kit.
Can you post a link?
TomMay be the spelling, Google Rupes 'eccentric' and you'll likely get some hits:
https://uploads.tapatalk-cdn.com/20180501/1172467c11dbacdda612a1a453778f60.jpg
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.