Car Detailing Tech Session & Demo at the Ace Café in Orlando!

[Mike Phillips]

Car Detailing Tech Session & Demo at the Ace Café in Orlando!


Tech Session starts at 9:00am sharp!


This Saturday, Team Autogeek will be at the ACE Café in Orlando from 8:00am to 2:00pm with a Tech Session taking place inside the ACE Café starting at 9:00am sharp and going until 9:30am.


Here's our demo car for this Saturday, it's a neglected 2008 BMW Mini Cooper!

Now this car needs an extreme makeover!

http://www.autogeekonline.net/gallery/data/3650/ACE_Demo_Car_01.jpg


Paint looks neglected....

Tech Session 1 - Restore the paint

http://www.autogeekonline.net/gallery/data/3650/ACE_Demo_Car_02.jpg



Headlights are definitely neglected...

Tech Session 2 - Restore the headlights

http://www.autogeekonline.net/gallery/data/3650/ACE_Demo_Car_03.jpg


Wheels, tires and plastic trim around wheel arches --> neglected

Tech Session 3 - Restore the rims, tires and plastic trim

http://www.autogeekonline.net/gallery/data/3650/ACE_Demo_Car_04.jpg



You can't see road film on glass "easily" from a picture but when the paint is neglected and stained you know the glass is too...

Tech Session 4 - Machine polish glass and apply glass coating

http://www.autogeekonline.net/gallery/data/3650/ACE_Demo_Car_05.jpg


Convertible top is a severely neglected - looks like a job for RaggTopp!

Tech Session 5 - Restore and protect canvas top

http://www.autogeekonline.net/gallery/data/3650/ACE_Demo_Car_06.jpg

Note: here's how you restore a canvas top

NEW Haartz/RaggTopp Convertible Top Brush - How to clean and protect a convertible top (http://www.autogeekonline.net/forum/new-car-care-products/104613-new-haartz-raggtopp-convertible-top-brush-how-clean-protect-convertible-top.html)






Vinyl graphics might be toast, but we'll see what we can do to bring them back to life...

Tech Session 6 - Restore vinyl graphics

http://www.autogeekonline.net/gallery/data/3650/ACE_Demo_Car_07.jpg



The ACE CAFE in Orlando
100 W. Livingston Street
Orlando, FL 32801
(Corner of Livingston & Garland)

http://www.autogeekonline.net/gallery/data/722/Ace_Cafe_m.jpg


ACE CAFE ORLANDO - Facebook (https://business.facebook.com/acecafeusa/)



Schedule

7:00am - We'll be there at o set-up

8:00am - Cars & Coffee starts

9:00am to 9:30am - Tech Session inside Ace Café

9:30am to 2:00pm - Autogeek booth will be set up in front of the main entrance for hands-on demos and taking questions



See you at the ACE!



:)

[Mike Phillips]

Just to note....

The first Tech Session this Saturday will be on how to correctly restore the paint on the 2008 Mini Cooper.


I'll be sharing,


Waterless wash
Baggie Test
Detailing Clay
Orbital Polishers
Foam Pads
One-Step Cleaner/Wax




After the Tech Session, myself, Bobby and Yancy will be at the Autogeek booth right out front to answer questions and let people test out tools...


:)

[mc2hill]

Sorry I will miss this!
A suggestion for your travel - don't get on I-4 if possible! Use 528/417/408 from I-95 and drive thru downtown O-town. And I can highly recommend stopping for lunch at Bad As's Sandwich, a little east of downtown and on the way back to the 408 (East-West Expressway).

[Aaryn NZ]

Ahh, these ones are my bread & butter details. Actually, if it had New Zealand licence plates on it I would've guessed it was a local car.

Mike - this will be somewhat of an Extreme Makeover for this Mini, it sure looke like the perfect before & after vehicle & perfect for showcasing how awesome us detailers are! :buffing:

Have fun team.

Aaryn NZ. :dblthumb2:

[AllanS]

Sorry I will miss this!
A suggestion for your travel - don't get on I-4 if possible! Use 528/417/408 from I-95 and drive thru downtown O-town. And I can highly recommend stopping for lunch at Bad As's Sandwich, a little east of downtown and on the way back to the 408 (East-West Expressway).

A chance of a traffic issue. It looks like it's supposed to finish nightly work BY 5 am. (I-4 Ultimate Project website. Construction Map | I-4 Ultimate (https://i4ultimate.com/construction-info/construction-map/#constructionAlerts). I hope this is outside link is ok with the moderators.) Also appears minimal work over Easter weekend.

I hope to be there.

[Mike Phillips]

Sorry I will miss this!
A suggestion for your travel - don't get on I-4 if possible! Use 528/417/408 from I-95 and drive thru downtown O-town. And I can highly recommend stopping for lunch at Bad As's Sandwich, a little east of downtown and on the way back to the 408 (East-West Expressway).


A chance of a traffic issue. It looks like it's supposed to finish nightly work BY 5 am. (I-4 Ultimate Project website. Construction Map | I-4 Ultimate (https://i4ultimate.com/construction-info/construction-map/#constructionAlerts). I hope this is outside link is ok with the moderators.) Also appears minimal work over Easter weekend.

I hope to be there.


Thank you to both of you!

We don’t want to be late.

We’re leaving the Geek at 5:00am - we should be good.

[emoji4]

[Mike Phillips]

5:00am and we’re on the road...

https://uploads.tapatalk-cdn.com/20180331/c45a00f58de25312b51ee970427e9efe.jpg


:)


Sent from my iPhone using Tapatalk

[tuantranbk]

The mini cooper is so cool. I wish I had one.

[Mike Phillips]

The mini cooper is so cool. I wish I had one.




So you join our forum. Then put your spam links in your Signature Line and think no one will notice. Here's a screenshot of your spam links, werid thing is your links go to a furniture website. To be honest, you would have better luck selling furniture going through normal, honest business marketing strategies instead of spamming a car detailing discussion forum.


https://www.autogeekonline.net/gallery/data/722/medium/spammerfurniture.jpg



Hang tight while you ban yourself.


:)