LC flat pads, did I order wrong??

[Cruzscarwash]

So the LC flats are my work horse pads, I wanted to get a few more with the 25% off sale but when they come in they were different.

Did they change the design or did I get the wrong ones??

Old ones on the left, new on the right

https://uploads.tapatalk-cdn.com/20180225/28258463b45938c69901ff321f943e62.jpghttps://uploads.tapatalk-cdn.com/20180225/7ae5e4195e0ce0f2f3cd64a7c0cb0673.jpg

Sent from my Pixel using Tapatalk

[The Guz]

They have been redesigned. Not sure if that is what you received.

Lake Country 5 1/2 x 7/8 inch Beveled Edge Foam Pads, buffing pads, Lake Country curved edge pads, polishing pads (https://www.autogeek.net/lake-country-beveled-edge-pads.html)

[Cruzscarwash]

They have been redesigned. Not sure if that is what you received.

Lake Country 5 1/2 x 7/8 inch Beveled Edge Foam Pads, buffing pads, Lake Country curved edge pads, polishing pads (https://www.autogeek.net/lake-country-beveled-edge-pads.html)It's what I ordered but they don't look like that at all

See that dark line in the center of the side of the pad, it looks like two half's have been glued together. And the Velcro is end to end with no pad overlaphttps://uploads.tapatalk-cdn.com/20180225/37b3001f8654596710be7594224cc14b.jpghttps://uploads.tapatalk-cdn.com/20180225/b1c7a98354488b41c4dd935049bd9508.jpg

Sent from my Pixel using Tapatalk

[TheSteelFoX]

I received some thin pros that the backing looked like yours. Have not used yet, but I just assumed the backing was supposed to be cut better but they made it out of the factory that way.

[Cruzscarwash]

Yeah I'm confused, the white backing look like the original ones I've always had in the past. So not sure what's going on.

Sent from my Pixel using Tapatalk

[Nix]

I hope i get the new ones..I ordered them last friday when they had 25% off sale and free shipping..

[Setec Astronomy]

I was just looking at the new pads since they were in the store header..."Simple Six" colors...except the positions of the white and green pads are reversed between the CCS and the flat pads...not that the white/green hasn't always been confusing. LC doesn't have any info on the new "Smart Pads" on their website, either.

[Cruzscarwash]

I hope i get the new ones..I ordered them last friday when they had 25% off sale and free shipping..That's when I ordered mine as well

Sent from my Pixel using Tapatalk

[Mantilgh]

The one you have on the left in your first pic looks like a B&S pad.

The one on the right looks like the now old version of the LC Flat Pads that I have some of.

Are you sure the one on the left is a LC pad?

[SWETM]

Honestly it's seems like it's a fault in the manufacturing. It looks as it started to trimmed from the face up to the middle and then stopped. Is the velcro the same diameter or is it bigger on the new ones? As I have reading they where gonna be thinner than the old ones. The velcro on the new ones does not seem to be safe to use to polish with. I would send a messege to the support on AGO and maybe to LC also and ask if those are as they should be.

[Cruzscarwash]

The one you have on the left in your first pic looks like a B&S pad.

The one on the right looks like the now old version of the LC Flat Pads that I have some of.

Are you sure the one on the left is a LC pad?Here's the pic from LC and AG, looks the same to mehttps://uploads.tapatalk-cdn.com/20180225/3ddd9da28ada758fdbfac7aa8a4c9879.jpghttps://uploads.tapatalk-cdn.com/20180225/0fd8793893db9a1a196a7ee80fddc261.jpg

Sent from my Pixel using Tapatalk

[Cruzscarwash]

Honestly it's seems like it's a fault in the manufacturing. It looks as it started to trimmed from the face up to the middle and then stopped. Is the velcro the same diameter or is it bigger on the new ones? As I have reading they where gonna be thinner than the old ones. The velcro on the new ones does not seem to be safe to use to polish with. I would send a messege to the support on AGO and maybe to LC also and ask if those are as they should be.It's all the way to the edge with a very very slight hang over the line in the center is odd as well

Sent from my Pixel using Tapatalk

[SWETM]

I agree with you that those looks strange. Send a question to the support and ask if those are as they should be.

[Mantilgh]

Here's the pic from LC and AG, looks the same to mehttps://uploads.tapatalk-cdn.com/20180225/3ddd9da28ada758fdbfac7aa8a4c9879.jpghttps://uploads.tapatalk-cdn.com/20180225/0fd8793893db9a1a196a7ee80fddc261.jpg

Sent from my Pixel using Tapatalk

Looks the same as the updated version and similar to the LC Hydro, but not like the year or so LC Flats that I have.

LC Flats have been backing up to the straight cut square edge

[Mantilgh]

https://uploads.tapatalk-cdn.com/20180225/457ae4aa4260a070eb41e11437ce06df.jpg

https://uploads.tapatalk-cdn.com/20180225/5b92691b53f72e384af6e904073d75e5.jpg


Sent from my iPhone using Tapatalk