PDA

View Full Version : Bugs Bugs Bugs



Pages : [1] 2

01AUDI
11-29-2017, 11:06 AM
I went out yesterday and washed the car, nothing special but i did just get a foam sprayer online and had to try it out !
After washing and drying I noticed the front of the car is still completely covered in highway bugs. I have to admit that I have been very bad about not washing lately and neglected this car so I am trying to get it back in shape and get a routine going. Either way, what can i do to help get these bugs off. My sponge has one side microfiber and one side a mesh like backing. I used that backing but it didn't scrape it off, is there something that will dissolve them of sorts ? I will be using a clay bar next month when I get my new DA polisher but i feel like i need something to use more often as i am on the highway a lot.
6110061101

Inthedeck
11-29-2017, 11:21 AM
I think once you clay your car, you'll notice some big differences. There are tons of different products... (https://autogeek.commerce-search.net/search?catalog=autogeek&submit=Go&_autodone=http%3A%2F%2Fwww.autogeek.net%2F&keywords=bug+and+tar+remover) so, check some of those out. I'm sure the pro's know best, but, it's a start.

01AUDI
11-29-2017, 11:28 AM
There are tons of different products...

haha that's exactly the problem. I have used Turtle Wax bug remover, RainX had a spray on bug and tar remover, and I got some foam can once.. all did nothing for me. Maybe i was doing it wrong, wrong pad, not enough wait time, etc. i don't know. Is there a preference in a liquid spray vs a foam spray remover? I just haven't found one that works on any of my vehicles, which is why i have so many ornaments on my front grill !

Goonie75
11-29-2017, 11:34 AM
Good morning. Tarminator is pretty good stuff. I let it dwell a bit then use the bug sponge found here on AGO or the back side of the sponge you mentioned. The sponge sold here will be hard until you use WARM water to soften it. After that, bugs stand no change. Patience. Side to side movements. If you're polishing anyway, the if it scratches you can get them out later (try not to scratch... lol). I've tried thick removers and thin and while the thicker may 'stay on the bumper longer', it probably doesn't really matter. Check out that sponge, it's really quite unique...

overall, if you wait for some of these great pros that are on the forum, they will point you in a good direction!

http://www.autogeek.net/bug-sponge-for-cars.html

peace

Ryan

Desertnate
11-29-2017, 11:36 AM
I've found bug removal almost always takes more work than a normal wash. Even with fairly fresh splatters on a coated car.

I like to use these: McKee's 37 Bug Scrubber Sponge (https://www.autogeek.net/bug-sponge-for-cars.html).

I simply toss one in the wash bucket to soften and use them as needed on spots which don't come clean with my wash mitt. In the Spring and Summer months, I use one every time I wash the car.

I also pre-soak the buggy areas like the lower hood line, front facia, and side mirror caps with Poorboy's Bug Squash (https://www.autogeek.net/poorboys-bug-squash.html). It does a great job when it comes to bug removal.

Inthedeck
11-29-2017, 11:37 AM
Try this, though, I can't say I've ever used it...but, from the reviews, sounds like a solid product to try. https://www.autogeek.net/poorboys-bug-squash.html

custmsprty
11-29-2017, 04:04 PM
Try this, though, I can't say I've ever used it...but, from the reviews, sounds like a solid product to try. https://www.autogeek.net/poorboys-bug-squash.html

This is a great product, I just re-stocked on the Cyber Monday Sale:

https://www.autogeek.net/pobugsq32oz.html

And this is my favorite bug sponge of all the ones I've used in the past, it's very durable and does not mar the surface.

https://www.autogeek.net/sonax-insect-sponge.html

ducksfan
11-29-2017, 04:22 PM
Second on the Sonax bug sponge. I get a lot of use out of it in addition to bugs.

Bug Squash is the only bug remover I've used. It works well. Not too many bugs in SoCal. So, I usually just use P21S Total Auto Wash @ 30:1 to take them off.

Paul A.
11-29-2017, 04:33 PM
Another vote for PoorBoys Bug Squash. That and a bug sponge does the trick for me on stubborn customer bumpers covered in old bug guts.

DogRescuer
11-29-2017, 04:52 PM
Just my 2 cents. Before every wash if front end needs work due to bugs. Using Megs SD and as stated a bug sponge and good old elbow grease and rinse A LOT wala good bye bugs. Clean license plate while I'm there.
Steve

DogRescuer
11-29-2017, 04:57 PM
Second on the Sonax bug sponge. I get a lot of use out of it in addition to bugs.

Bug Squash is the only bug remover I've used. It works well. Not too many bugs in SoCal. So, I usually just use P21S Total Auto Wash @ 30:1 to take them off.

Sir, why the Sonax Sponge and not the yellow one with what looks like honeycomb?

DogRescuer
11-29-2017, 04:59 PM
https://www.autogeek.net/pinsafscrub.html

This one.

custmsprty
11-29-2017, 05:03 PM
Sir, why the Sonax Sponge and not the yellow one with what looks like honeycomb?

The Sonax sponge is awesome and most likely will far out last the foam one. I've had mine for a couple years and it's practically like brand new.

And it's less money :dblthumb2::dblthumb2::dblthumb2:

DogRescuer
11-29-2017, 05:12 PM
The Sonax sponge is awesome and most likely will far out last the foam one. I've had mine for a couple years and it's practically like brand new.

And it's less money :dblthumb2::dblthumb2::dblthumb2:

You're not kidding, my yellow ones absolutely just disintegrate, thanks.

Calendyr
12-01-2017, 06:03 AM
My process for bug removal is this:

Spray the area with an orange degreaser and let dwell for a few minutes.

Then wash the car normally. This will remove the vast majority of them. If any are left, I spray again with orange degreaser, let the product work for a few mins again then use a microfiber towel with orange degreaser soaked in a small part of it to wipe what is left.

This process will remove what ever wax or sealant on you had on, so make sure to re-apply your product of choice to protect the pannel once more. Of course degreasers don't affect coatings so if you have one on, you are good ;)