PDA

View Full Version : What do you guys do about under the door handles?


fightnews
10-21-2017, 03:01 PM
How do you guys correct under the door handles? Is it by hand only? Mine could use a little touching up.
Finick
10-21-2017, 03:05 PM
https://uploads.tapatalk-cdn.com/20171021/e43a6ee6bda96bba709a8f2a54b29d2b.jpg

I had no issues using some UC then UP under mine.
fightnews
10-21-2017, 03:33 PM
https://uploads.tapatalk-cdn.com/20171021/e43a6ee6bda96bba709a8f2a54b29d2b.jpg

I had no issues using some UC then UP under mine.

You did it by hand right? It looks unbelievable your car does to!!!
Finick
10-21-2017, 03:34 PM
You did it by hand right?

Sure did [emoji4] probably should have pointed that out, my mistake.
LSNAutoDetailing
10-21-2017, 04:00 PM
by hand is always difficult. Soft paint will correct quickly... iBird NANO is probably the way to go.
fightnews
10-21-2017, 04:53 PM
by hand is always difficult. Soft paint will correct quickly... iBird NANO is probably the way to go.

Damn that's not in the budget unfortunately
ScottH
10-21-2017, 05:40 PM
Guys I put polish (or compound) on 2 sides of a microfiber towel and pull the towel back and forth against the inside of the door handle. Sometimes larger (deeper) door handles require that I double up on the towel, but after a few minutes of back and forth (up and down) with the towel, many of the scratches are gone. For really stubborn ones, I use a 3" LC foam pad (yellow or orange) on the a 18v drill. Does the trick. Here's a pic of the pad and drill adapter.

ScottH
jmeyers278
10-21-2017, 11:50 PM
by hand with a microfiber and menzerna...400, 2500, 3500
Don M
10-22-2017, 06:08 AM
Like everyone else, if the buffer won't reach, it's compound or polish, fingers and a microfiber.