Recommendations for 7424 MF Bonnets for stock Plate-Foam Pad?

[MarkD51]

Forgive me folks if this has been posted before.

Can any of you recommend and point me in the right direction for any specific brands and the proper size for both MF and Terry Bonnets that will properly fit the stock Backing Plate and attached White Foam Pad that comes included stock with the PC 7424XP D/A?

Thanks!

[Rsurfer]

https://www.autogeek.net/cobra-6-5inch-bonnets.html

[MarkD51]

https://www.autogeek.net/cobra-6-5inch-bonnets.html

Thank you for the link.

I wasn't entirely sure what Bonnets would be the best fit for the stock Pad-Plate, but did measure that Pad this morning, and have found it to be 6" Diameter.

Doing a search in the store, I do also see 6" Bonnets listed as well besides the 6.5" you linked to.

Reckon I could buy and try just a couple of the 6" next time I order goodies here, and see how they fit? In any case, just a couple 6" Bonnets won't be a huge expenditure lost if they won't fit.

I'm thinking the tighter they fit, the better they'll work without any slippage-movement occurring.