HD speed vs Megs D166

[Cruzscarwash]

Well it was done, not the best and in 3 parts unfortunately but it was done

HD speed
Nothing surprising here, did what it always does, cuts decent, wipes away easy (except for the first video) can be used in direct sunlight and left with no wipe off issues.

Meguairs D166
Wow.. I'm impressed, not only did it cut better but it breaks down thin wipes off extremely easily and and and it did great in the hot direct sunlight. Remember it was 111° degrees out, my phone overheated to the point I had to place a fan on it and the products sat and baked for over 10 mins. This is definitely a product that is going to switch alot of users and I think at this moment, it's for the better. Now we have to see how well it holds up

Part 1

https://www.facebook.com/groups/AutogeekDetailing101/permalink/1042184852583452/

Part 2

https://www.facebook.com/groups/AutogeekDetailing101/permalink/1042190629249541/

Part 3

https://www.facebook.com/groups/AutogeekDetailing101/permalink/1042193325915938/https://uploads.tapatalk-cdn.com/20170829/2bc4a51816ea6d59000baee173a3636f.jpg

Sent from my Pixel using Tapatalk

[fly07sti]

Very cool, Thanks for taking the time to do this. My gallon arrives this week. Can't wait to test drive it.

[Cruzscarwash]

Very cool, Thanks for taking the time to do this. My gallon arrives this week. Can't wait to test drive it.Wish it was better, I had it all planned out and it all went to crap..lol

Sent from my Pixel using Tapatalk

[Firehouse Mike]

Sounds like 3D should be getting a bit nervous! Can not wait to try it out!!

Mike

[Cruzscarwash]

Especially when Meg's is only a buck more

Sent from my Pixel using Tapatalk

[PaulMys]

Thank you for that test, Cruz.

[WaxMaster1]

Thanks for the comparo, I don't have facebook and can't watch though

[Cruzscarwash]

I think I'm going to redo it using my GoPro because like I said it was so hot outside my phone actually shut off from overheating twice so I'm going to see what I can do again and then go from there

Sent from my Pixel using Tapatalk

[Avgguy]

Good work.

[BTLew81]

Looks like a winner. Let it cure and top it with UPW or Collinite for even more durability!

[Cruzscarwash]

Looks like a winner. Let it cure and top it with UPW or Collinite for even more durability!Well this is supposed to last as long or longer then I think m20 so I don't see a reason to top it

Sent from my Pixel using Tapatalk

[Avgguy]

I have a bottle on the way.

[custmsprty]

Sounds like 3D should be getting a bit nervous! Can not wait to try it out!!

Mike

Sounds like to me when you set the bar high like 3D did it takes time for the competition to meet the bar or exceed it. Me I'll stick with Speed unless someone wants to send me this for free to try, same as McKee's 37 AIO never bought it never will.

When you have the other guys product to take apart in your mutli million dollar lab and clone it or try to better it it's not saying much. Lest all of you not forget 3M owns Meguiars.

My money and kudos stand with the little guy. 3D HD not Minnesota Minining and Manufacturing, aka 3M.

Hardly fair to little 3D in California:

The 3M Company, formerly known as the Minnesota Mining and Manufacturing Company, is an American multinational conglomerate corporation based in Maplewood, Minnesota, a suburb of St. Paul.[2]

With $30 billion in annual sales, 3M employs 88,000 people worldwide and produces more than 55,000 products, including: adhesives, abrasives, laminates, passive fire protection, personal protective equipment, dental and orthodontic products, electronic materials, medical products, car-care products (sun films, polish, wax, car shampoo, treatment for the exterior, interior and the under chassis rust protection),[3] electronic circuits, healthcare software and optical films.[4] 3M has operations in more than 65 countries including 29 international companies with manufacturing operations and 35 companies with laboratories. 3M products are available for purchase through distributors and retailers, and online directly from the company.

So Meg on and I'll stick with my 3d HD Care Care.

[Cruzscarwash]

Sounds like to me when you set the bar high like 3D did it takes time for the competition to meet the bar or exceed it. Me I'll stick with Speed unless someone wants to send me this for free to try, same as McKee's 37 AIO never bought it never will.I have samples of 360 I can send u. Idk if I'd say the bar was high with speed, it was easy to work with and u had good results bit 151 always cut better it only lacked on longevity over speed

Sent from my Pixel using Tapatalk

[custmsprty]

Keep em, not interested.